0%

0%

Martin Simlastik

ASIC designer

Austria

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/24/2014.

Projects I Contribute To

The chatroom about RPi projects, issues, contests entries and more

Raspberry Pi chat

Projects I Like & Follow

Fully 3D printed x-ray machine using a dental tube and a custom transformer.

3D Printed X-Ray Machine

Hackaday Prize 2019

Very recently I was so impressed by a Japanese modern artist who draws golden fish in epoxy. I cannot draw but make circuit. Why not!

Enclose them all in super clear epoxy!

Improved ZVS Mazzilli driver, optimized for high frequency and high voltage.

Piernas's Fast ZVS Mazzilli Driver

An inexpensive charge controller and 2A 5V power supply designed to supply remote power for devices ranging from Arduino to Pi 3 class.

Solar MPPT Charger for 24/7 "IOT" devices

Replaces the stock controller with an nRF52 BLE SOC and MCP23S17 io expander. BLE Kinesis with great (few months) battery life.

Wireless BLE Kinesis Advantage (Custom Controller)

Tomographic scanner using my X-Ray machine, a simple motor to rotate the object and a reconstruction software

X-Ray CT Scanner

Reverse engineering the Color3

eeColor Color3

I made a sensor to secretly listening without connecting to the CAN BUS. we use the electromagnetic waves emanating from the CAN BUS.

CAN BUS Hacker

Hosein Movahedian Attar

Telecommand power management using handheld radios

Push to Reboot

Ultrasonic distance monitoring using HC-SR04 sensor, Arduino WiFi and AskSensors IoT cloud

Distance monitoring with Arduino & AskSensors IoT

Open-source, modular, portable computer system.

OpenPDA

Here is a proof-of-concept for DVI / HDMI output implemented on an iCE40 FPGA

DVI / HDMI Pmod for an iCE40 FPGA

Designing circuit boards for high speed applications requires special considerations. In this video I start to talk about them.

VIDEO: PUTTING HIGH SPEED PCB DESIGN TO THE TEST

A robot fish with pcb fins

Robot Fish (PCB Fins)

KaroWear is a NRF52840 based watch in a USB dongle form factor with a multitude of sensors.

KaroWear

Rohit Gujarathi

This robot follows a black line and go wherever the black line goes.

Arduino Line Follower Robot

Three-phase Power Quality Analyzer made on MSP430F6779

Three-phase Power Quality Analyzer

Artem Kashkanov

This project is to build experimental, safe and insulated AC power source for Power Electronics projects.

Building Experimental Insulated AC Power Supply

View all

Bits

Matt Stock wrote 06/29/2017 at 19:06

Thanks for following my project!

Are you sure? yes | no

David H Haffner Sr wrote 01/11/2017 at 14:13

Thank you for your interest in my little project!

Are you sure? yes | no

Patrick Van Oosterwijck wrote 10/20/2016 at 22:48

Hello, thanks for following my #LiFePO4wered/Pi project!

Are you sure? yes | no

Eric Hertz wrote 08/30/2016 at 10:30

Howdy! Thanks for the follow!

Are you sure? yes | no

Michael O'Brien wrote 07/25/2014 at 02:18

Thank you very much for the skull!

Are you sure? yes | no

Eric Tsai wrote 07/24/2014 at 23:12

Hi Martin, thanks for the skull!

Are you sure? yes | no