0%

0%

mrwho

Tinkerer, IoT hobbyist and Pi destroyer.

Austria

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/30/2018.

Projects I Like & Follow

Hackaday Prize 2019

Portable Power Platform for Pi Zero

PiSugar Battery for Raspberry Pi zero

Hackaday Prize 2019

A solar-powered ESP8266 based Weather Station, which can run years without taking power from an external source

Solar Powered WiFi Weather Station V2.0

All Sky meteorite camera build under 150$.

Cheap All Sky camera project with Raspberry Pi

A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.

Minimal Raspberry Pi CM 4 Carrier

Prof. Fartsparkle

A 1" squared ESP32 module that natively takes LiPo batteries, charges them, and doesn't kill them.

uMesh

Jarrett Jarrett

Automatic power-cycling made safer

Reboot-o-matic

A solar-powered node that stores energy in a supercapacitor, wakes-up regularly, measures different parameters, and sends them to a gateway

Wireless solar-powered sensor node

ATTiny841 based wrist watch for 9 year old

Vlad's Round Watch

Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them.

Soft Soldering Jig

Hackaday Prize 2019

Ultra-small, low-power, LoRaWAN-enabled sensor tile for monitoring bee hives and other tight spots

Bee Minder

In this workshop, we’ll be building a firefly together with custom jigs, brass wire, and LEDs.

Remoticon: Circuit Sculpture Workshop

Hackaday Prize 2020

An open hardware project to sense what is happening in your home

Placemon - sense your home

$anfractuosity$ anfractuosity

We're going to learn some techniques for reverse engineering 2-layer PCBs.

Remoticon: PCB Reverse Engineering

This is a RAK4260 based, Feather styled LoRa dev-board.

Penguino Feather SAMR34 LoRa Dev-Board

Orkhan AmirAslan

A CircuitPython dev board designed for breadboards! With adjustable voltage rail, multiple GPIOs and a 1.3" 240x240 LCD.

Serpano

Two Feathers featuring the NXP i.MX RT10xx series Cortex-M7 MCUs.

MIMXRT10xx Feathers (RT1011 and RT1062)

A simple breakout board for the SGTL5000 Audio Codec in PMOD format.

SGTL5000 I2S Audio Codec PMOD

A RP2040 in a Zero form-factor!

Zero RP2040

View all

Bits

Patrick Van Oosterwijck wrote 09/19/2020 at 23:48

Hi, thank you for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE and #LiFePO4wered/Pi projects! The #LiFePO4wered/Pi has since been succeeded by the #LiFePO4wered/Pi+, so you may want to follow that one as well. :)

Are you sure? yes | no