0%

0%

nanuksetiawan87

Nanuk666

Loww

Following Follow me

Similar accounts worth following

This user joined on 03/19/2019.

Projects I Like & Follow

The 2018 Hackaday Prize

Presenting the "Tingle" wearable for compulsive behaviors and a hacked fitness tracker wearable device prototyping platform.

Hacking Wearables for Mental Health and More

curt-white Curt White

Reverse engineering the SMA-Q2 smartwatch to run open source firmware on it

Color Open Source Smartwatch

emeryth emeryth

The 2018 Hackaday Prize

A haptic glove that vibrates when its touches a virtual object. It also tracks physical finger positions and hand orientation.

DIY Haptic Glove for VR

dinithi-silva Dinithi Silva

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

irene-wolf Irene Wolf

A new way of thinking to a IOT thermostat:

FCThermostat: Another overengeneered IOT device

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

A 16x7-Segment LED Clock that syncs time from GPS satellites.

gps_clock

A high speed, highly sensitive piezoresistive sensor matrix that provides quantitative information related to prosthetic fit.

Piezoresistive sensor matrix

chriscoulston chris.coulston

256-channel data acquisition system (DAS) to provide a bio-potential reading in the 0.4Hz-500kHz frequency range using a flat panel detector

Bio Balance Detector

andras-f Andras F

Moving Ferrofluid with PCB Coils!

Ferrofluid + PCB Coils

carl-bugeja Carl Bugeja

The 2018 Hackaday Prize

An open-source panoply of UAVCAN connected boards to enable smart sensors and actuators for modular robotics development

CVRA's Robotics CAN Ecosystem

salah-missri Salah Missri

Dawn - the SUBLEQ operating system by Geri

Dawn - the SUBLEQ operating system by Geri

The 2018 Hackaday Prize

Replacement laptop battery with cheap Lithium cells, 3D-printed case, and re-used electronics

3D Printed Laptop Battery

neal-d-corbett Neal D Corbett

Underbed RGB LED light (controller): Motion activated, separate push button to control lightning (different modes), logarithmic LED-fading

Aurora: Motion activated underbed LED light

Design of involute gear tooth profiles and hints and tips for 3D printing real gears to do work.

3D Printing Gears and a Planetary Gearbox

The 2018 Hackaday Prize

A turrent which is an array of 4 lidar sensor's along with two compasses and a servo that scan the environment and dump data into database.

Robotics sensor - 360 scan of environment

Tools and Materials Required Arduino Uno + Protoshield Module RTC Tactile Switch (tombol) DFPlayer mode Cable jumper Speaker

smart clock talking

Have you ever tried hacking science or mathematics? Well, BIBHORR FORMULA is an ideal hack to the most complicated trigonometry concept.

BIBHORR FORMULA - Hacking Science

View all

Bits