Close
0%
0%

Mr. Smith

Lighting things by day, letting the smoke out by night.

Following
Send a private message
Similar accounts worth following
1 Followers
30 Following
0 Projects
0 Likes
mr-smith
Send a private message

This user joined on 01/02/2020.

43.7k
2.4k
43
94
Breaking the encryption on the Lerdge series mainboards so I can try porting Marlin 2.0 to it.
Project Owner Contributor

Lerdge 3d Printer Mainboard Hacking

jc-nelsonJ.C. Nelson

25.2k
148
12
119
A Pi emulating a GameBoy sounds cheap. What about an FPGA?
Project Owner Contributor

VerilogBoy - GameBoy on FPGA

wenting-zhangWenting Zhang

15.5k
182
154
163
After three years... Supercon again! And the new badge too!
Project Owner Contributor

BADGE FOR SUPERCON.6 / November 2022

voja-antonicVoja Antonic

12.3k
4.1k
18
71
I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.
Project Owner Contributor

Passap E6000 rebuilt and replaced console

irene-wolfIrene Wolf

11.8k
3.3k
3
53
3D printed fully customizable exoskeleton arm development kit
Project Owner Contributor

3D Printed Exoskeleton Arm

kristjan-berceKristjan Berce

10.3k
6.1k
10
71
Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine
Project Owner Contributor

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sournReginald Sourn

8.4k
2.4k
0
36
Put your Verilog on real hardware, real cheap
Project Owner Contributor

FPGA Bootcamp #3

al-williamsAl Williams

6.6k
544
0
0
Recuse a 20W Portable Rechargeable Cordless LED Work Light
Project Owner Contributor

Recuse a 20W Portable Rechargeable Cordless LED

youkito1991youkito1991

6.5k
5.9k
3
36
A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework
Project Owner Contributor

Super atari 6502 (A "DIY" 2600 hardware clone...)

robertRobert

6.1k
57
5
54
Built with the 65C02 and the Parallax Propeller. Retro II is open source and utilizes off the shelf parts to recreate the magic of the 80's.
Project Owner Contributor

Retro II - An Apple II Compatible Computer

jon-thomassonJon Thomasson

4.6k
2.4k
2
16
TouchYou, is a pair of wearable interfaces that enables affective touch interactions with people at long distance.
Project Owner Contributor

TouchYou: a wearable touch sensor and stimulator

leonardo-gomesLeonardo Gomes

4.3k
2.8k
15
140
Open-hardware bicycle compass
Project Owner Contributor

Aurora Bike Compass

andr-biagioniAndré Biagioni

2.8k
23
20
30
Retro-Futuristic 8-bit AVR based computer with 5" TTL CRT, PS-2 Keyboard, Serial Thermal Printer, PCM sound, and flash file system
Project Owner Contributor

Resto-Mod 8 bit microcomputer

john-andersonJohn Anderson

2.7k
338
2
3
After many years I finally managed to build a clock that fits all my needs.
Project Owner Contributor

Ultimate Alarm Clock

chris-bChris B

2k
2k
6
30
Early computer designers were cheap masochists. This front panel is much better yet could have been made 50 years ago !
Project Owner Contributor

Hardware assembler / EMUI

yann-guidon-ygdesYann Guidon / YGDES

1.7k
1.7k
1
19
A coin cell sized coin cell powered ring oscillator with LEDs
Project Owner Contributor

SMD Pizza

marblemarble

1.4k
413
3
23
Ring that uses small LED display to display messages and animations.
Project Owner Contributor

LED Ring

mileMile

789
526
1
7
A binary clock made from TTL chips from the 70s and 80s
Project Owner Contributor

TTL binary clock

ken-yapKen Yap

View all

Share this profile

Share

Bits

Send a private message to Mr. Smith

Become cool instantly

Create your Hackaday.io profile like Mr. Smith and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Mr. Smith", please tell us the reason.