0%

0%

NyghtX

Software Developer

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/02/2021.

Projects I Like & Follow

A Raspberry Pi internet world radio receiver

Raspberry Pi World Radio

abraham-martinez-gracia Abraham Martinez Gracia

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion-mclionhead lion mclionhead

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

3D printed toroidally wound axial flux permanent magnet air core motor. 3DTAFPM?

3D Printed Axial Flux Motor

colby-johnson Colby Johnson

The 2018 Hackaday Prize

A low-cost STM32 board with motor controllers created along with visual programming and control software for use in education.

Visual Robotics Platform

Supplyframe DesignLab: 2022 Hackada…

Run Xiaomi Thermometer LYWSD03MMC with a supercapacitor and mini solarpanel.

Solar powered Bluetooth Thermometer with Supercap

martmet MartMet

A simple programmable infrared volume controller using Digispark or ATTiny85 and PT2257

Volume85

stefano-risato Stefano Risato

This project is using the Arduino Nano and WS2811 LEDs for a 50 channel (cues) remote firework firing system.

Programmable firework firing system with remote

w-jason-altice W. Jason Altice

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

In this project, I upgraded my 3D printer to be able to capture time-lapses of the prints without any additional electronics.

3D Print Time lapses Without Octoprint

Control and animate a RGB LED-Strip with any IR remote control.

RGB LED-Strip, controlled by IR remote control

This is a 3d printing modular pulley system.Total mechanical advantage is 8:1. So, we can lift a mass of 80 kg with a 10 kg pulling force.

3D Print High Strength Pulley System(Block&Tackle)

An Apple ][ I/O card to control up to four SPI peripherals without the need for bit banging.

SPI Controller Card for the Apple ][

Hackaday Prize 2020

If our pollution adversely affects the environment, then, it's our responsibility to protect the environment, humans, plants, and animals

Aquarium Monitoring System - 3G/4G/IoT/AWS

guillermo-perez-guillen Guillermo Perez Guillen

In this project I build a smaller version of my previous GNSS module. The main features are: LiPo battery, USB, active antenna, bluetooth

GNSS module 2.0 - GNSS via Bluetooth

View all

Bits