0%

0%

Olivier Godfroid

Automation and electronician

Belgium

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/28/2020.

My Projects

Connected temperature and humidity sensor Dual technology RF

IOT SENSOR

olivier-godfroid Olivier Godfroid

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

A piezo inkjet printer built from scratch

DIY Inkjet Printer

dominik-meffert Dominik Meffert

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

The 2016 Hackaday Prize

A Raspberry Pi based Astrophotography System

StarPi

The 2017 Hackaday Prize

I reversed engineered the canbus screen in my Clio and created a bluetooth remote control to listen to webradios without touching my phone.

Smart car radio

Official Hackaday Prize Entry

Embedded BASIC interpreter for CC2540 and CC2541 Bluetooth LE modules

BlueBasic: BASIC for Bluetooth

tim-wilkinson Tim Wilkinson

The 2017 Hackaday Prize

Creating a four legged robot with a running bound gait.

Mr. Runner

alex-martin Alex Martin

The 2016 Hackaday Prize

A DIY 3D printer (big volume, inexpensive, lightweight and portable).

RigTig's Big 3D Printer

Just for the sake of making it happen, I've designed an open-source TOMU form factor ESP32 design. It fits in a USB Type-A port.

FEMU - An ESP32 Wi-Fi/Bluetooth board in TOMU form

Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!

LadyBug BEEFY: 3D printer motorized microscope

ahron-wayne Ahron Wayne

Keychain USB multiple password manager/generator/injector

Key Pass

The 2015 Hackaday Prize

NodeUSB is a tiny, low cost $9, WiFi ready, ESP8266 USB dev kit for Internet of things, it comes with NodeMCU pre-installed

NodeUSB- ‘Eat your own dog food’ WiFi IoT DevKit

The 2015 Hackaday Prize

open source circular knitting machine replicable with digital fabrication and makers' tools.

Circular Knitic

varvara-guljajeva varvara guljajeva

This project is aMicroUSB powered ESP8266 Oled Display. It can be used to display Weather Information or Wifi SSID Information.

MicroUSB powered ESP8266 Oled Board

0miker0 0miker0

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

Official Hackaday Prize Entry

Automating everything in a room for less than $50.

Poor Man's Home Automation

The 2016 Hackaday Prize

Designing hardware is difficult. We Have a hardware platform that generates schematic and layout design files in a typical 10 minutes time.

Simplify Embedded hardware designs

makarand-kapoor Makarand Kapoor

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

View all

Bits