Close
0%
0%

Sebastian

I, for one, welcome our robot overlords.

Anchorage Alaska
Following
Send a private message
Similar accounts worth following
2 Followers
42 Following
0 Projects
0 Likes
sebastian
Send a private message

This user joined on 04/12/2020.

27.1k
1.5k
41
273
K3lso is a quadruped robot similar to MIT mini cheetah and MIT Cheetah 3.
Project Owner Contributor

K3lso Quadruped

Robin FröjdRobin Fröjd

8.3k
46
11
56
48 display controllers over three I2C buses; 288 four-digit 18:88 clock displays (25 segments per display); full 8-bit PWM grayscale control
Project Owner Contributor

7,200-segment, 1,152-digit 7-seg display

Chris CombsChris Combs

7.9k
1.2k
2
118
Medium-sized 12-DOF Quadruped Robot inspired by MIT Cheetah and Boston Dynamics Spot Mini
Project Owner Contributor

NOMAD Quadrupedal Robot

Implemented RoboticsImplemented Robotics

6.1k
31
4
27
Cheap and easy to replicate! Full files and instructions will be released after completion.
Project Owner Contributor

3D Printed 3-Axis Joystick and Throttle H.O.T.A.S

Peter BuckleyPeter Buckley

4k
22
8
22
A smart reflow oven with a nice user interface (lvgl), powered by an ESP32.
Project Owner Contributor

Reflow Oven

HX2003HX2003

3.4k
8
3
27
A no-touch musical keyboard
Project Owner Contributor

CoViano

MaBe42MaBe42

3.1k
47
5
22
Small size actuator 67x48 with 5.4:1 reduction ratio and dual encoders.
Project Owner Contributor

Kitt actuator

Robin FröjdRobin Fröjd

2.6k
2
3
12
The 555 as circuit sculpture.
Project Owner Contributor

CS 555

MaBe42MaBe42

2.1k
18
2
19
A quirky word clock using an 8x5 LED matrix shield.
Project Owner Contributor

WordClock8x5

Mark WilsonMark Wilson

1.9k
25
7
31
A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST
Project Owner Contributor

RP2040 Stamp

arturo182arturo182

1.7k
6
2
18
3D printed vase using transparent 3D printer filament as light guide and Neopixel LEDs for illumination.
Project Owner Contributor

Neopixel Vase

makeTVeemakeTVee

1.3k
6
1
4
Reversible, no extra switch, multiple frequencies delay module for classic British cars.
Project Owner Contributor

Classic car intermittent wiper motor controller

Frederic LFrederic L

1.2k
7
0
9
.
Project Owner Contributor

G-code Importer Blender Add-On

heinzheinz

1.1k
1.1k
0
8
Control 5 home appliances from the manual switches, smartphone, IR remote. Also, control relays with room temperature and ambient light.
Project Owner Contributor

Home Automation Using Arduino & WiFi Module ESP01

SubhajitSubhajit

1k
5
0
7
A clock built using an ESP32 and a 7x7 flipdot display
Project Owner Contributor

FLIPDOTS Clock

Chamu RajasekeraChamu Rajasekera

820
4
0
10
Teensy 4.0, VL53l0X Lidar, SSD1306 Display, PCA9685 PWM and CircuitPython 6
Project Owner Contributor

Autonomous Cordwood Car

HACKRCHACKRC

750
750
0
7
The Sonos Remote Station describes my first steps in freeform electronics.
Project Owner Contributor

Sonos Remote Station

Tom JanssensTom Janssens

470
8
9
9
Higher current, still air supercapacitor charger
Project Owner Contributor

25 A Supercapacitor Charger

sciencedude1990sciencedude1990

View all

Share this profile

Share

Bits

dannyvandenheuvel wrote 06/21/2020 at 15:05 • point

Thanks for liking my project #3D printer Interface 

  Are you sure? yes | no

Send a private message to Sebastian

Become cool instantly

Create your Hackaday.io profile like Sebastian and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2023 Hackaday

Report user as inappropriate

You are about to report the user "Sebastian", please tell us the reason.