0%

0%

Peter Balch

50 years developing s/w and h/w

Scotland

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/17/2022.

My Projects

Supplyframe DesignLab: 2022 Hackada…

An antique intercom that we use every day for our apartment block.

Vintage Intercom Re-purposing

Supplyframe DesignLab: 2022 Hackada…

Converting an internal telephone for use as a DTMF landline phone.

Old Telephones

Supplyframe DesignLab: 2022 Hackada…

An autowinder keeps a weight-driven clock going forever.

Autowinder for Pendulum clock

Projects I Like & Follow

Official Hackaday Prize Entry

Integration of cheap wireless Arduino sensor nodes with an awesome home automation platform called OpenHAB. Explore interface options.

$20 Wireless Arduino Home Automation w/ OpenHAB

eric-tsai Eric Tsai

How to power up and communicate with the cheap RCWL-0516 radar sensor module

First steps with the RCWL 0516 radar switch

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

The 2018 Hackaday Prize

Fully functional floor piano, with midi in/out, leds and training mode.

Cheap Expandable Floor Piano

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

Is there room for another oscilloscope? Real Time nodejs/html5 Sci ToolBox! Arduino | Raspberry Pi | FPGA

GinScope | Science ToolBox | Oscilloscope

gintaras-valatka Gintaras Valatka

Track and Trace anything with the Arduino AnyTracer of only 25 x 25 mm! It is the smallest, complete GPS GSM tracker in the entire world.

Arduino AnyTracer

addydej addydej

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Developing my first hardware con talk in the open

Supercon talk: a pragmatic guide to motor controls

jonathan-beri Jonathan Beri

A slightly unsafe journey into alternative fuels.

Run a small engine on WATER! Ends with a BANG!

TheThriftstoreHacker

Hackaday Prize 2020

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Open Exosuit for Differently Abled

alex-m-sunny Alex M Sunny

MQTT-enabled Numitron clock with Arduino and ESP8266

Numitron Clock

harri-ohra-aho Harri Ohra-aho

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Multi-Functional Custom Robotic Research Platform

PROJECT MOOBA

nebra-labs NEBRA Labs

You'll learn what is the finality of standalone Arduino and how it is applied in real projects.

Standalone Arduino Applied in Projects

silcios-lab Silícios Lab

In this project, I upgraded my 3D printer to be able to capture time-lapses of the prints without any additional electronics.

3D Print Time lapses Without Octoprint

Large Humanoid Robot 150cm With lightweight plastic design and originally planned for walking

Large Humanoid Robot

A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.

3D Printed Vortex Particle Separator for Shop Vac

aaron-p Aaron P.

View all

Bits