0%

0%

Luis

Lame programmer/tinkerer

Spain

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 07/31/2019.

Projects I Like & Follow

learn how to overclock your Raspberry Pi device in a safe and efficient ways for reaching any goal!

Boost your Raspberry Pi in Minutes

The 2017 Hackaday Prize

A WiFi fidget spinner, taken from concept to ordering parts in one weekend

IoT POV Fidget Spinner

An affordable computer that anyone can make! CP/M for all! *** A RunCPM Project***

Arduino Due CP/M Personal Computer

martian Martian

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board

thingSoC ESP32 Android/IoS GUI Control

pattern-agents Pattern Agents

Arduino Uno-powered terminal emulator on a tiny 1"x1" TFT screen

Tiny Wearable 8-bit VT100 Console

nick-matantsev Nick Matantsev

The 2017 Hackaday Prize

Absolute best watch ever !!!!

BPW34 solar powered led watch

Emulation of a Z80-based CP/M 2.2 machine with 64K ram on an ESP8266

CP/M 8266

matseng matseng

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

The 2018 Hackaday Prize

Unique, compact power conditioning enables always-on sensor monitoring and Long-Range radio (LoRaWAN) link for IoT applications.

SoLoRa - Solar Powered always-on IoT sensor node

joe-miller Joe Miller

The 2018 Hackaday Prize

Software and Hardware to make Word Clocks easier to make

Confagrid

stephen-legge Stephen Legge

The 2018 Hackaday Prize

The Firefly is a DIY $5 hardware wallet for the Ethereum blockchain, with a secure air-gapped solution that is mobile-friendly.

Firefly Hardware Wallet

richard-moore Richard Moore

Demonstration of #MongooseOS application that implements internet button functionality using ESP8266 module and Amazon AWS IoT service.

Internet button on ESP8266 and AWS IoT in 2 mins

Easy and Fun: Track objects with a Raspberry Pi, a camera and an Arduino in less than an hour!

Raspberry+Arduino CamTracker

marcelo-valeria Marcelo Valeria

Arduino source codes is compiled and executed as PC applications...

Arduino Simulator

georgi-angelov Georgi Angelov

Using the built-in reed switch on the mcMod120, we'll show you how to setup a super easy way to be alerted and track opening doors!

Wireless IoT Door Open/Closed Sensor

My personal KiCAD library management workflow, developed over the years, recently written up and extended.

AVR-Method: A KiCAD Library Standard

This is a single Z80 based computer, with CP/M support, ROM-less, using ATmega32 as code injector and for I/O.

FabZ80: just another Z80 CP/M computer

fabrizio-di-vittorio Fabrizio Di Vittorio

View all

Bits