0%

0%

Rob Latour

Software developer and all-around nice guy

Ottawa, ON, Canada

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/06/2019.

My Projects

Voice-controlled scrolling message board using an esp32 board, Max7219 display, Google home/mini, IFTTT and Pushbullet

Voice controlled scrolling message board

ESP32 NTP Time Server for a home network

ESP32 NTP Time Server (Stratum 1)

multiple sensors with lots of redundancy + direct publishing to weather services + MQTT support + OTA updates

Open source solar powered weather station

Using your Google Home or Alexa, IFTTT, an ESP32-POE-ISO and some code you can wake up your computer with your voice

WOL with Google home/Alexa + IFTTT + ESP32-POE-ISO

2021 Hackaday Prize

Control your computer with a four-button remote control

BlueKey Remote

Nixie tubes are expensive, this is a poor man's alternative

Poor man's ESP32 Nixie Clock

View all 9 projects

Projects I Like & Follow

Making my own automatic chessboard

Automatic Chessboard

Phantom Chessboard

7 segment clock

EPTAORA

ekaggrat singh kalsi

Home automation using the Loxone series of home automation products along with hacks to extend functionality and reduce cost

Commercial home automation

I have trained wild magpies in my Garden to trade litter for food! The whole project relies on mechanical design, electronics, software and

BirdBox

100% PLA 3D Printed aircraft (excluding RC gear)

3D printing an RC airplane

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

The 2017 Hackaday Prize

A 16bit single cycle RISC processor suporting R format I format BEQ and JMP format.

16bit RISC Processor

Building on my RPi Telegraph project, the Arduino Teletype translates characters to baudot code and drives a teletype.

Arduino Teletype

The 2016 Hackaday Prize

The garden squid is an open platform for indoor garden automation to bring software, hardware, and garden hackers together!

Garden Squid

Christine Banek

Official Hackaday Prize Entry

We've taken a simple CNC base and are writing a python code that can generate CAD drawings based on your needs. ~$100 build.

Inexpensive Multipurpose Parametric CNC Base

Building a three-meter analog clock

Voltmeter clock

a Forth for interactive hardware design on the PSoC 5LP

gelFORTH

The 2017 Hackaday Prize

This is a easy-to-build Segway with Arduino Nano.

Arduino Segway

Vinícius Jean Ferreira

Ultra low power device without batteries, zero maintenance, everlasting and environment friendly

Supercaps Solar Panel project

Hackaday Prize 2019

A breadboard that can be (re)programmed to wire itself.

A Programable Breadboard

Hackaday Prize 2019

1 Name of work - the manufacture of 3D printer for printing filled polymers.

3D printer

Cheap target kettle gets the IoT treatment

IoT Kettle Australia

A simple thermometer using a bar of RGB-LEDs (NeoPixels) and an ATtiny45. Everything runs of a single AAA-Battery.

LED-Thermometer

Florian Baumgartner

View all

Bits