0%

0%

sajidulislam

I am interested in electronics and I want to make what dream

Dhaka,Bangladesh

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/08/2019.

Projects I Like & Follow

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

The 2017 Hackaday Prize

An affordable modular platform for open robotics development for hackers. Provides a jump start to build your own robot.

MORPH : Modular Open Robotics Platform for Hackers

roald-lemmens Roald Lemmens

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

A portable Yagi antenna for working amateur radio satellites

WA5VJB ultra portable dual VHF/UHF Yagi

The 2018 Hackaday Prize

printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation

3D Printed Strain Wave Gear

johannes-hassler Johannes Hassler

A robot that moves vertically on the pipe.

Pipe Climbing Robot

Anastasiia Zelenska

A BMS that publishes Cell Voltage to a MQTT Broker

6S IOT BMS

Here is an AUX input hack for a 2004 Pontiac Vibe radio. ( DELCO 28022766 )

AUX INPUT FOR PONTIAC VIBE RADIO

beto-green Beto Green

This is my diy UPS hat that i use with my raspberry pi 3. It can power the raspberry up to 11 minuites when the micro usb power drops.

DIY Raspberry Pi UPS Hat (Up to 11min power)

Dimitris Matsoukas

COMPLETE PROJECT WITH A CHIP ELECTRONIC PARTS ARDUINO COIN ACEPTOR (USED FROM OLD MACHINE) POWER SUPPLY 6 RESISTORS RELAY 12 V

ARDUINO SINGLE CIGARETTE VENDING MACHINE

A led matrix that can be seen through and can be viewed both sides

Acrylic led matrix

This project try get the dimensions about a deep foundation without a danger to the responsible for the excavation survey.

Deep Foundation Laser Scanner

laio-athos-nevar-fonseca Laio Athos Nevar Fonseca

The 2018 Hackaday Prize

Another Arduino UNO compatible board. It is not another cloned board, we removed a part of it, added more features, perfect for education

Arduino UNO for Education

I'm experimenting with some ideas to create a physical representation of a tesseract.

A Phyical Tesseract (Hypercube)

sean-hodgins Sean Hodgins

Using the 8BitRobots Module to operate a 3D printed robot arm

3D Printed Robot Arm: 8BitRobots

tim-wilkinson Tim Wilkinson

I'm on vacation, not bored

a "true" in system programmer

Commercial syringe drivers are large, heavy, and expensive. This device does not control for volume over time. *Not for medical use!*

3D Printed Syringe Driver

anthony-tamalonis Anthony Tamalonis

This project adapts a AM/FM radio receiver to a private Internet stream. It also provides various TiVo-esque features.

Radio-to-Internet Streamer

View all

Bits