0%

0%

Sebastian

New to the hacking/programming scene but really interested in all of it. So tell me where to start?

Oceanside CA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/22/2022.

Projects I Like & Follow

Supplyframe DesignLab: 2022 Hackada…

The Tracer is an open-source ESP32-based Inertial Measurement Unit tracker

Tracer | A Wearable for Things!

An active scope probe with high-ish bandwidth and very low input capacitance

DIY 1.3 GHz FET Probe

Supplyframe DesignLab: 2022 Hackada…

Thermionic energy conversion isn't very efficient (it's also nothing new) but they *are* photovoltaic devices you can build with a torch

Glass Tube Solar Thermionic Converters

nick-poole Nick Poole

A Star Trek away mission themed escape room in a box.

Star Trek Shuttle Console

A plant-like sculpture made from RGB LEDs, Warm White LEDs, and current limiting resistors.

Kaleidoscope

A small 12-DoF printable legged robot using quasi-direct drive brushless actuators

Felin Quadruped

pat92fr pat92fr

PCB-to-control-Stepper-motor-without-arduino

PCB-to-control-Stepper-motor-without-arduino

Supplyframe DesignLab: 2022 Hackada…

Save 5% of U.S. residential energy consumption by using ultrasonic cold drying.

Ultrasonic Clothes Dryer

mike-rigsby Mike Rigsby

A SciFi inspired PC Hardware Monitor

MAINFRAME COMPUTE OBSERVATOR

mangus-tiranus Mangus Tiranus

I made a mouse droid companion for my R2-D2. Unlike its Death Star brethren that are all black, mine is a rusty one from Tatooine.

Star Wars Mouse Droid (Tatooine Edition)

Track lateral and vertical movements of a 3D printer via AprilTags. Then, get informed of malfunctions related to motion via Telegram.

IoT 3D Printer Motion & Status Tracker w/ Telegram

kutluhanaktar kutluhan_aktar

Making Baffa-2 Homebrew Computer print like old school computers

Baffa-2 Printer Interface

augusto-baffa Augusto Baffa

Controlling Linux system using hand gestures

Gestro

wong-tian-jie Wong Tian Jie

The ESP-01 WiFi Module Shield provides a convenient connection between an Arduino and an ESP-01 module.

ESP01-Wifi-Shield-for-IOT-projects

This project implements the necessary hardware to run Colecovision Games on Baffa-2 Homebrew Computer

Colecovision games on Baffa-2 Project

augusto-baffa Augusto Baffa

I need a dual power supply for one of my projects, so I built a USB dongle around an off the shelf DCDC converter

Isolated +/- 5V power supply USB dongle

A mix of fiberoptic cable, copper, LEDs, and a discarded 'small spotlight that looks like a rock' from a planter in our backyard.

Fiber Flower

rich-morrissey Rich Morrissey

This is multipurpose PCB specially design for arduino projects so that we can connect multiple components at once with arduino

Compact-size-PCB-for-Arduino-projects

View all

Bits

David Matthew Mooney wrote 05/04/2022 at 15:02

I got into the hacking/making scene when I built a DIY radar detector. It looked like something out of “Honey, I Shrunk the Kids.”

Are you sure? yes | no