0%

0%

hakkibaysal

I am computer geek and sci-fi fan, i love Asimov and foundation

Turkey

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/25/2022.

Projects I Like & Follow

2021 Hackaday Prize

An Open Source Software Defined Oscilloscope

ThunderScope

100 MSps 2ch oscilloscope based on Raspberry Pi Pico

RPScope

Raspberry Pi Compute Module 4 carrier that plugs directly to HDMI port.

Raspberry Pi CM4 TV Stick

he arrival of small satellites that used LoRa for telemetry data has meant that less technically qualified persons, with a very low budget,

Ground station for LoRa satellites

2021 Hackaday Prize

Programmable Motorized Pin Art

PinThing

Powered by Raspberry Pi PICO

PICOmputer ZX - Pocket ZX Spectrum

Supplyframe DesignLab: 2022 Hackada…

Thermionic energy conversion isn't very efficient (it's also nothing new) but they *are* photovoltaic devices you can build with a torch

Glass Tube Solar Thermionic Converters

A Waveform analyzer, Signal generator and logic tester in a small PI PICO. With a dedicated application, Runs on Android.

Raspberry Pi Pico 200Khz Digital Oscilloscope

halfstudents.in

2021 Hackaday Prize

A resilient strip (of tape measure fame) triad fed through centrally driven rollers extends a structure constrained by self spacing ribs

OBoom: low cost deployable linear actuator

Episode: "The Long Patrol", CORA keeps Starbuck company during a long duration flight and also uses her flying skills to elude the Cylons!

C.O.R.A. from Battlestar Galactica

Collate weight, color, and emitted ionizing radiation of foods to train a NN. Then, run it on Beetle C3 to detect food irradiation doses.

IoT AI-driven Food Irradiation Dose Detector

2021 Hackaday Prize

In This Tutorial, We Built a Wireless E-Microscope with ESP32-CAM.

7$ DIY E-Microscope with ESP32-CAM

In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.

3D Printed Flying wing FPV Drone

Couple of months ago, I bought a "Raspberry Pi Pico" to get some hands-on experience of it and to create some amazing projects using it.

Getting Started With Raspberry Pi Pico

This PCB-designed board is used to protect the devices from damage while converting AC voltages to DC voltages as per device requirements.

SMPS Power Supply PCB Board Design

Arshmah Shahkar

SMT components used 2 channel remotely and manually controlled home-automation PCB.

2 Node SMT Smart Home-Automation PCB.

Asheesh Asheesh

Some of my projects use PCBs as an art medium.

PCBs as an art medium

Supplyframe DesignLab: 2022 Hackada…

MakeWater.org is a nonprofit challenging students to become citizen scientists and help innovate D.I.Y. water purification techniques.

Citizen Science Water Purification Innovation Kit

View all

Bits