0%

0%

Gian Carlo

I'm engineer in mechatronics and a master in mechanics.

Colombia

Following Follow me

Similar accounts worth following

This user joined on 06/24/2018.

Projects I Like & Follow

The 2017 Hackaday Prize

RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.

RepRap HELIOS

nicholas-seward Nicholas Seward

The 2018 Hackaday Prize

Relax, your home knows which appliances to switch on. Justifying "Automation" in low cost Home Automation systems.

Dexter - The New Age Home Automation

aditya-mukherjee Aditya Mukherjee

The 2018 Hackaday Prize

An open source smart watch built for anxiety and panic disorder.

Minder

austin-marandos Austin Marandos

What started out as a reason to use a neat optical beam splitter I found has turned into my first exercise in home wearable fabrication!

Adafruit Feather BT Holo-HUD (aka Scroogle Glass)

First, I wanted to buy 2 or 3 Led grow lights, but they were too expensive or not what I needed. So I decided to build my own Led light

Led Grow Light

alain-mauer Alain Mauer

Step-by-step instruction to install Mono on Raspberry Pi

Mono on Raspberry Pi

Use sensors from Atlas Scientific to measure the water quality of a sealed aquarium.

Monitoring an Aquatic Ecosystem Using Raspberry Pi

This is all bout interfacing DHT12 humidity and temperature sensor with Raspberry Pi by using JAVA and Pi4J and through I2C interface.

DHT12 Interfacing with Raspberry Pi

bikash-narayan-panda Bikash Narayan Panda

I want to keep track of how much propane I use to heat my shack. So I'm building an IoT scale to keep track of the weight of my tanks.

Propane and IoT Propane Accessories

dan-maloney Dan Maloney

A very simple binary clock with alarm

Simple Arduino Binary Clock

marcel-ochsendorf Marcel Ochsendorf

For "Repairs You Can Print Contest", and for the sake of documenting the repairs and improvements, done by 3D printing.

3D Printed Repairs

christian-lerche Christian Lerche

The 2017 Hackaday Prize

Modular water rocket, with pressure gauge, gyro, thrust control and everything else a modern space program needs.

Backyard Space Program

haydn-jones haydn jones

The 2017 Hackaday Prize

This simple 3D printed tool is an effective assistive solution to improve the usage of the inhaler devices by people suffering from asthma.

3D Printed Ergonomic & Friendly Asthma Inhaler

Birtha is the name of our RV. Projects and automation are inevitable.

BIRTHA - Base Interface RV/Trailer Home Automation

daren-schwenke Daren Schwenke

In this project we automated household appliances and we used a Arduino, Bluetooth Module, wires and sensors

Home Automation System

shaherayar-khan Shaherayar Khan

This allows you to change filaments during print with 100% success without any issues.

3D Printer Filament Window

The 2017 Hackaday Prize

A high impedance, single ended input to fully differential output preamp

MAD IN hi-z

michele-perla Michele Perla

Using a spot welding technique

3D Print extra strength parts

chris-mitchell Chris Mitchell

View all

Bits