0%

0%

Max

Engineer

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/24/2015.

My Projects

Underbed RGB LED light (controller): Motion activated, separate push button to control lightning (different modes), logarithmic LED-fading

Aurora: Motion activated underbed LED light

Projects I Like & Follow

The 2018 Hackaday Prize

The Redox project is an open-source, QMK (Quantum Mechanical Keyboard Firmware) powered, ergonomic split mechanical keyboard.

Redox keyboard

cordwood + smt + jewelry + blinkies + zinc-air batteries

cyborg ring

The 2018 Hackaday Prize

Upgraded version of the small board for connect multiple rotary encoders on the I2C bus.

I2C Encoder V2

DIY Skirt with 120 Neopixel LEDs and motion detection

Neopixel LED Skirt

The 2018 Hackaday Prize

A small, cheap ($2 BOM), open source charger for LIR2032 and 20mm rechargeable coin cells built from an MCP73831.

LIR2032 Coin Cell Charger

Ever since I have my own company I wanted to have a PCB business card. What not add an OLED display to it?

Electrocard

Activates the blinkers 3 times from just a touch on the indicator stalk for 1999 SAAB 9-5

3 Blink Modification for SAAB 9-5

Saabman Saabman

The keyboard. The mouse. Tragically separated since birth. Finally rejoined in "Dichotomy."

Dichotomy - Keyboard and Mouse

Joshua Broekhuijsen

The 2018 Hackaday Prize

8*16 LED matrix display with bluetooth low energy to connect to any smart phone

LED BLE Hearty Necklace/Badge

Convert a Thinkpad 380ED keyboard and trackpoint to USB

IBM Thinkpad 380ED Keyboard/Trackpoint to USB

The 2018 Hackaday Prize

The Micro TV-B-Gone is based off of Adafruit's original TV-B-Gone kit, except made to be as small as possible, using an LIR-2032 coin cell.

Micro TV-B-Gone

Nicholas Junker

IKEA Hack: Make the Duktig kitchen microwave a little bit more realistic.

A microwave interface for the Duktig kids kitchen

Crude door phone and RFID lock project for my yard gates door

ESP8266 door phone

The 2018 Hackaday Prize

Arrhythmia Detection using single lead ECG (Hand ECG)

ECG on the Go

Convenient indicator LEDs for your breadboard

Rainbow Jellyfish

A split, ortholinear, ergonomic keyboard. Oh yeah, and it's open source. But I didn't design it.

I'm Building an ErgoDox!

For people who want to focus on certain task, the Productivity Timer is a simple device that divides your time into well-defined blocks.

Productivity Timer (a.k.a. Pomodoro Timer)

The 2018 Hackaday Prize

An almost fully automated phone screen fixer (Experimental)

Phone Screen fixer

View all

Bits

GrayPillow wrote 05/14/2017 at 10:15

Thanks for following #AnanasStepper 2.0 ！！！

Are you sure? yes | no

Patrick Van Oosterwijck wrote 04/26/2017 at 15:32

Thank you for following my #LiFePO4wered/18650 project Max!

Are you sure? yes | no