0%

0%

TheMixedSignal

Engineer, Breaker of Drill Bits, First of His Name

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 08/18/2020.

My Projects

This project is an automated winder for making custom pickups for a guitar or a tonewheel organ

Automated Pickup Winder

Stepper-Driven, MIDI-Controlled, Tonewheel Robot made with laser cut sheet metal tonewheels and custom-wound pickups

Hammond-Inspired Tonewheel Organ Robot

Uses an Arduino Due and a stepper motor + driver to control a slide whistle made of 3d printed parts and PVC pipe. Laser-cut base plate.

MIDI-Controlled Slide Whistle

This project uses a 3D Printed Speaker "Cone" and Coil Bobbin as an audio exciter

3D Printed Audio Exciter

Things I've Built

3d Printed Tonewheel

Tonewheel robot using 3d printed tonewheel(s), magnetic iron PLA filament

Projects I Like & Follow

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

An easy to build, program, modify and use AVR and ESP based Lasertag system for everyone!

LZRTag - Flexible DIY Lasertag

A maker friendly capstan based BLDC driven quadrupedal robot. Based on mjbots electronics

Stanley - the capstan based quadruped

Damian Lickindorf

Hackaday Prize 2019

Automated barbecue and smoker on a budget

Smokey Mc Smokerson

The 2018 Hackaday Prize

Square Inch music widget

Noise Nugget

Fabien-Chouteau

PHOSPHOR is a MIDI-controllable distortion device for analog video. I made it to create glitchy video projections in sync with Ableton Live.

PHOSPHOR Video Distortion

FFT spectrum analyzer is an test equipment that uses Fourier analysis and digital signal processing techniques to provide spectrum analysis.

DIY FFT Audio Spectrum Analyzer

mircemk mircemk

Hackaday Prize 2019

Auditive and visual feedback with minimal effort in a modular package for everyone!

The Airdrum - Make music while moving

alessandro verdiesen

Create 3D printing filament from PET flakes. Bottle → Flakes → FILAMENT → 3D Printing

3D printer filament maker

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

The 2018 Hackaday Prize

Building a system that encodes and reads music in MIDI format and controls the flashing of a Neon Sign with minimal latency

Real-Time Audio-Controlled Neon

A DIY true single-chip computer with video and C interpreter

ELLO 1A

The 2018 Hackaday Prize

Standalone synth and surround sound mixer. An 8ch input/output soundcard combined with two analog filters, controlled with a raspberrypi.

8 channel surround sound synth with analog filters

Slavko Glamocanin

Hackaday Prize 2020

Making fluid warmers accessible to relief camps and dispensaries

The 3$ Fluid Warmer

Hackaday Prize 2020

A listening helper that listens to the surrounding audio to alert you of someone or something that is trying to get your attention.

Listen Up!

Hackaday Prize 2020

how to build LED chaser using arduino uno

Multiple RGB Led Chaser with Arduino Uno

Add 4 extra line level inputs to your amplifier

Audio Input Expander

Hackaday Prize 2020

High altitude weather balloon hardware in the form of stack-able RPi hats

RPi Based High Altitude Weather Balloon Hardware

Aditya Mukherjee

View all

Bits