0%

0%

Tobias

I do stuff (sometimes)

Australia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/18/2020.

My Projects

A small, fully 3D printed tank, designed with a focus on compactness and performance

Mini FPV Speed Tank

A multicoloured ePaper display powered by Rasperry Pi, Python, Flask, Chromium and a reverse engineered Australian government API

Coloured ePaper Weather Display

A fun digital clock, featuring a 6 digit, RGB LED, 7 segment display. Built fully freeform style with brass wire!

Freeform clock with RGB display!

Projects I Like & Follow

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

SATtiny is a solar Circuit Sculpture in a form of a satellite with blinking LEDs with optimized current consumption to last all night long.

SATtiny

64-bit binary counter

God's clock

2021 Hackaday Prize

Wireless device for measuring temperature, humidity and pressure with a e-paper display, with a weather forecast, batteries -operated

Mini weather station Efekta with e-paper display

Andrew Lamchenko

USB keyboard approximately the size of three pennies in a line

The Smallest Keyboard

TEC.IST TEC.IST

Modern take on TIL311 and reimagination of #PICTIL optimized for easier production and lower part count

reTIL

Stack a bunch of transparent OLEDs together and you have yourself a Volumetric Display.

TENEX - Solid State Volumetric OLED Display

A ultraportable slate-style cyberdeck with a 35% QAZ keybaord and 7.9-inch display.

QAZ Personal Terminal

A clock that uses a magnetically driven tuning fork to keep time!

Tuning Fork Clock

Open-source design for a 3d printer that can print metal at a low cost.

FDM 3D Metal Printer

A WiFi clock who also displays temperature & weather if it turns bad !

WiFi Clock

Cheap four-legged insect robot

Fluffbug

Following the normal papercraft workflow, but with PCBs instead

PCB Papercraft

Stephen Stephen

360 degree panoramic video on an omnidirectional chasis, controlled in VR.

PanoBot

Quadruped robot to push 3D printed component limits. Minimizing cost by increasing development hours, made total sense when I started.

Quadruped w/3D Printed Recirculating Ball Screws

A rethink of the number of segments required to display a digit

6 segments suffice

Ken Yap Ken Yap

Is that a keyboard in your pocket?

Klap Keyboard

Electronic “paper crane”

Orizuru

View all

Bits

Ken Yap wrote 10/19/2020 at 01:59

Thanks for liking #6 segments suffice !

Are you sure? yes | no

Tobias wrote 10/19/2020 at 02:06

Thanks for thanking me for liking your project !

Are you sure? yes | no

Ken Yap wrote 10/19/2020 at 02:11

I'm a fan of recursion too! 😉

Are you sure? yes | no