0%

0%

Tonalli Sanchez

The work isn't very easy, but enjoy it, yes it is.

México

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/03/2020.

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

Portable electronic device to measure air and noise pollution

Street Sense

mike-teachman Mike Teachman

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

Hackaday Prize 2020

Affordable, precise, integrated motion control for robotics

Tinymovr Motor Controller

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

The 2017 Hackaday Prize

A WiFi fidget spinner, taken from concept to ordering parts in one weekend

IoT POV Fidget Spinner

A simple circuit to control strip LED brightness using pulse width modulation

Simple LED strip dimmer

ken-yap Ken Yap

4G (100 mbps down/ 50 mbps up) – Ultra fast internet connectivity for your Raspberry Pi, excellent for large downloads and video streaming.

IoT Bit 4G & LTE Hat for the Raspberry Pi

The 2017 Hackaday Prize

A Network-on-Chip for the System-of-Systems Era Enabling mixed interface communication between embedded devices (MCU, sensors etc.)

InterNoC

lefteris-kyriakakis Lefteris Kyriakakis

Take an small robotic arm (MeArm) and a dev board with more processing power than necessary (Jetson TX2). What could go possibly go wrong?

Ty the Typing Robot

elecia-white Elecia White

ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.

IOT ModbusBox

A 3D Printing desktop arm that can write and draw!!!

DARM

A safe, digital model particle accelerator that electromagnetically propels a steel ball around a closed hoop.

Working Model Particle Accelerator

The 2017 Hackaday Prize

An assistive device that can reliably help frail patients transfer from bed to wheelchair and back.

TurningPoint.

louie-cai Louie Cai

An excellent project for location tracking involving a Ublox sensor and an Arduino, which can be used for many portable devices.

Arduino Ublox Neo-7N GPS Module Project

LED Lights which literally dance to the tunes you play!

Sound Reactive LED Lights

Anand Mahadevan S S

View all

Bits