0%

0%

dot_solutions

Small Hacking Published

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/09/2019.

My Projects

DIY Manual Pan and Tilt using Arduino and two small steppers

Pan and Tilt Camera steppers and Arduino 100 to 1

Projects I Like & Follow

Official Hackaday Prize Entry

Classic yet original Arcade System built from the ground up, using a Raspberry Pi.

Raspberry Pi Vintage Arcade

brayden-devito Brayden DeVito

The 2018 Hackaday Prize

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

Smart Motor Driver for Robotics

danny-fr Danny FR

Hackaday Prize 2019

This is a design for a low-cost extruder for printing objects directly from recycled plastic flakes instead of using filament.

Trash Printer - Recycled Plastic 3D Print Head

sam-smith Sam Smith

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.

CAN Diagnostics Logger with Arduino CAN shield

This tutorial will show you how to configure volumio to support HIFI DAC.

How to configure volumio to support HIFI DAC.

ameliayou amelia.you

Official Hackaday Prize Entry

A monster flashlight containing a 100W 8500Lm led with big heatsinks and batteries. With morse function to tell the night goodbye.

Portable 100W led flashlight

yannick-gigawipf Yannick (Gigawipf)

Raspberry Pi Based Hardware Sampler / Synth Platform

SamplerBox 1

The 2018 Hackaday Prize

Universal 3D printed gripper for robotics.

Modular Universal Jamming Gripper

04K - 50K LUT. Kicad. Open source. Pin header 1.27mm. 92 IOs. Breadboard-compatible. Lots of optional GND.

Altera MAX10 Breakout Board

A MIDI controller with arcade push buttons and 32 RGB LEDs

MIDI Fighter

The MK01 Palmtop is a small portable computer build inspired by scifi movies.

MK01 PALMTOP

The 2018 Hackaday Prize

PROTECT YOUR 3D PRINTER WITH THIS 3D TEMPERATURE GUARD

3D PRINTER WATCH DOG GUARDIAN

The 2017 Hackaday Prize

An affordable Arduino Compatible Robot for learning to Code

CodiBot

This is my diy UPS hat that i use with my raspberry pi 3. It can power the raspberry up to 11 minuites when the micro usb power drops.

DIY Raspberry Pi UPS Hat (Up to 11min power)

Dimitris Matsoukas

Official Hackaday Prize Entry

A module in CPU pipelines that'll end all of the troubles related to the sequential nature of instruction execution, by means of Time Travel

Flux Capacitor in CPU Pipelines

eduardo-corpeo Eduardo Corpeño

The entire rocket and the fuel are all made of 3D printed PLA.

Fully 3D printed rocket with 3D printed fuel

The 2018 Hackaday Prize

Following a supercharger mod on my 1990 Corrado, I realized that I needed a unique tube design to ensure proper fit and no preassure leaks

3D Printed Boost Tube Replacement

View all

Bits