0%

0%

trats20050

Retro handheld

usa

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/09/2020.

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

Damian Lickindorf

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

A switch for a Dahlander dual speed asynchronous 3-phase motor based on a finite state machine implemented on Arduino

Arduino-based Dahlander switch

jean-noel.simonnet

A HAT to easily interface a Raspberry Pi with a KNX bus.

KNX Raspberry Pi HAT

A project to activate a remote control for a garage via smart phone using an esp8266 module, a pair of relays and some cloud services.

esp8266 internet controlled relay (garage opener)

Official Hackaday Prize Entry

An implementation of a Simultaneous Location and Mapping algorithm for the Sparki robot to be used in middle or high school robotics classes

Sparki SLAM

Interface a Pi Zero directly to a Commodore 64 via User Port and IEC. Give your C64 a Linux upgrade.

Raspberry Pi Zero W / Commodore 64 Interface Board

Leif Bloomquist

A Raspberry Pi inside of a GameBoy retaining as much of the case as possible and using

Raspberry Pi Gameboy Utilizing Cartridges

Toshiba libretto ct30 portable raspberry pi laptop.

Raspberry Pi mini laptop

Mattias Coudron

The 2015 Hackaday Prize

The Redtree Hydra is the 1st computer for robotics designed to easily add components, communicate with groups of other robots and share data

Redtree Hydra: A modular platform for robotics

Redtree Robotics

Hackaday Prize 2020

The New Dexterity Low-Cost Robotic Airship for Education and Research

A Helium-Based, Affordable Robotic Airship

Install OwnCloud on Raspberry Pi and make your own cloud server

OwnCloud on Raspberry Pi

Easy and Fun: Track objects with a Raspberry Pi, a camera and an Arduino in less than an hour!

Raspberry+Arduino CamTracker

Marcelo Valeria

Hackaday Prize 2020

A Raspberry pi UMPC. An open platform device to use and fit your project .It is fully open-source hardware. So you can hack it as you wish

mutantC v2 - A HandHeld for everything

Ultra Mobile PC - using Raspberry Pi, Nec MobilePro and 3d print

Raspberry Pi - UMPC

A car which can be controlled using a Remote

Remote Control Car

Ahmer and Waqar

View all

Bits