0%

0%

vixual freakz

I'm new in all this but curious and want to learn so I can put this in practice.

Twin Peaks

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 04/19/2022.

Projects I Like & Follow

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

Clyde D. Corpuz

An interface breakout board for Raspberry Pi Compute Module 4, permanently attached to a 7" IPS touchscreen display

Raspberry Pi CM4 Сarrier with Hi-Res MIPI Display

I rebuilt my Passap E6000 knitting machine so that I can now control not only the front but also the rear needle bed.

Passap E6000 rebuilt and replaced console

If it can output VGA, it can be turned into ASCII art.

Realtime VGA ASCII Art Converter

ESP32 runs FabGL to produce VGA display

ESP32 VGA PS/2

land-boards.com

The 2018 Hackaday Prize

Yet another open source platform for drones, but this one is fully integrated and uses the SAME70@300Mhz x2 + a Pi Compute Module

Open Source All-In Drone-Droni SAME70Pi (Kopernik)

2021 Hackaday Prize

Now in the 3rd iteration stage, this 3D printable single rotor drone with thrust vector control offers more safety and features than ever!

The Ball-Drone Project MK III

Benjamin Prescher

Learning to use a Raspberry Pi 400 laptop as an everyday computer and sharing the results.

Raspberry Pi 400 Daily Driver

Create a home automation gateway, you can access from anywhere, using a Raspberry PI, Sonoff switches with Tasmota and FlashLex.

Internet Accessible Home Automation with Sonoff

A Raspberry Pi based desktop 3D scanner with +/- 10 micron accuracy.

3D Scanner MK2

Exploring lighting control with DMX/Art-Net, including teensy, rPi, feather ESP32, led strips and COTS lights

DMX-ArtNet explorations

Two 1.3" low cost 240x240 LCDs are used to create a 3D Display that needs no glasses.

DIY Arduino Parallax 3D Display

Madaeon Madaeon

Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.

Home Automation Project using ESP32 & Blynk IoT

Remote control for Raspberry Pi GPIO peripherals

Remote RasPi GPIO control

LORA Remote Control Rover

LORA Remote Rover Stage 1

A FM Radio receiver using RDA5807 or TEF665X and an ESP32 MCU

FM Radio with Bluetooth Broadcast (A2DP)

Make your own infra-red remote control

19 Button IR Remote Control

On this project I will show you how to measure the speed of movement of an object using ultrasonic sensor.

Speed Measurement Using HC-SR04 Ultrasonic Sensor

mircemk mircemk

View all

Bits