0%

0%

Walmore Colmenarez

Following Follow me

Similar accounts worth following

This user joined on 06/15/2017.

Projects I Like & Follow

The 2017 Hackaday Prize

FREE and Open Source, Arduino Due based Telescope Control GOTO

rDUINOScope Boiana

dessislav-gouzgounov Dessislav Gouzgounov

The 2017 Hackaday Prize

RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.

RepRap HELIOS

nicholas-seward Nicholas Seward

3D Printed holder: Allen wrenches are held in a circle by a single o-ring, all individually accessible.

Improved Allen Wrench / Hex Key Holder

alex-rich Alex Rich

The 2017 Hackaday Prize

Fully 3D-printable electric longboard drivetrain with built-in idler system.

3D-Printed Electric Longboard

yowhwui yowhwui

The IOExtension module is based on four shift registers (74HC595) to provide 16 Digital Inputs and 16 Digital Outputs

Add Digital Inputs and Outputs to Your Arduino

diy-guy-chris DIY GUY Chris

My entry for the flex PCB contest. I'm not sure how well a flex PCB will work for an LED-studded möbius strip, but let's find out.

Möbius Flex

chris-miller Chris Miller

we want to monitor air quality as well as concentration of gases in air of different cities.

Real time air quality monitoring with IOT, Arduino

Learn how to create your own Mystery Box, that will open only by interacting with the three inputs.

Arduino Mystery Box

The ShopArm is an easily implemented robot arm. Just train it and then use it

ShopArm: A Practical 3D Printed Robot Arm

The 2017 Hackaday Prize

multispectral LED computer vision plant biofeedhack system

Plant LED biofeedhack system

Make a DIY Time Clock to monitor your employee's arrivals and transform your workplace in a Smart Office for less than $40!

DIY IoT Time Clock for Smart Office

This arduino based device measures, records and uploads T, RH, BP data to ThingSpeak

Arduino-IoT enabled dual BME280 HygroThermoGraph

For less than $60, make a bedside remote to turn off all your lights remotely and automate them with Prota smart hub for automation.

DIY Smart Home bedside remote

Combining an old Motorola radio Hand Held Control Head with a Radio Shack CB radio

Hand Held Control Head CB

qbfreak QBFreak

The 2017 Hackaday Prize

A Work-In-Progress, low-cost and open-source project to give the functionalities of microscope and 3D scanner to a 3D printer.

SuperScanner

jos-david-marroqun-toledo José David Marroquín Toledo

I've been thinking about putting a pulse monitor in a ring form factor for a while, so here we go

Ring-based Heart Rate Monitor

orlando-hoilett Orlando Hoilett

Serial mezzanine with management for host to one or many targets.

RPUadpt - a shield for multidrop serial over CAT5

ronaldsutherland ronald.sutherland

eDOTcore: A bit more than an Arduino Uno board

eDOTcore: A bit more than an Arduino Uno board

View all

Bits