Close
0%
0%

shane.snipe

Motor master. EE tryharder.

Chicago, Illinois
Following
Send a private message
Similar accounts worth following
4 Followers
9 Following
2 Projects
11 Likes
shanesnipe
Send a private message

This user joined on 08/13/2015.

602
9
8
9
The wireless quadruped made from $10 in parts and materials.
Project Owner Contributor

Webot

shane.snipeshane.snipe

117
4
0
2
This is an attempt to bring pick and place capability to our makerspace based on the work done by Erich Styger
Project Owner Contributor

Fox.Build PNP

shane.snipeshane.snipe

52.4k
929
74
444
A smaller and cheaper open source brushless motor
Project Owner Contributor

PCB Motor

Carl BugejaCarl Bugeja

48.7k
711
44
462
An open-source, 3D printed, high precision robotic arm with trainability
Project Owner Contributor

Dexter

Haddington DynamicsHaddington Dynamics

26.5k
728
18
185
A powerful, compliant actuator for legged robotics
Project Owner Contributor

OpenTorque Actuator

Gabrael LevineGabrael Levine

20.9k
246
37
187
3D Printed ESP32 Powered Video Streaming Robot
Project Owner Contributor

ESP32 WiFi Robot

Max.KMax.K

17.5k
637
15
110
Tiny robot for Hacking and EdTech.
Project Owner Contributor

Skoobot

Bill WeilerBill Weiler

7.4k
155
4
100
good looking and clever 4-legged robot
Project Owner Contributor

Dizzy Wolf

MishaMisha

6k
97
51
85
The reduction of strain-wave, but using a 'single' stage planetary gearset.
Project Owner Contributor

MPRT - Modified planetary robotics transmission

Daren SchwenkeDaren Schwenke

6k
143
14
88
A 3d-printed bipedal robot. A desktop option for semi-direct drive walking research.
Project Owner Contributor

TipTap

Darren V LevineDarren V Levine

4k
70
11
49
This is Quadbot 17, a work-in-progress quadruped robot with 22 degrees of freedom, based on Robotis AX-12 motors and a 3D-printed chassis.
Project Owner Contributor

Quadruped robot with 22 DoF

Dimitris XydasDimitris Xydas

2.7k
32
14
18
By means of motor vectoring
Project Owner Contributor

Model rocket with active stabilization

Oriol CasamorOriol Casamor

2.7k
24
7
22
Terrain-going quadruped. 3D printable. Two servo drive.
Project Owner Contributor

Landbeest walking robot

Dejan RisticDejan Ristic

2.2k
30
10
41
Little Flash runs for twenty minutes, charges in ten seconds.
Project Owner Contributor

Little Flash

Mike RigsbyMike Rigsby

2.1k
19
2
20
This Arduino based robot was recreated from a 2013 UC Berkeley paper and can crawl under some doors.
Project Owner Contributor

STAR, an Arduino Robot Recreation

AliAli

1.8k
228
1
11
Building a Pick and Place machine on the cheap, in a repeatable way.
Project Owner Contributor

Thrifty Pick and Place

Alastair YoungAlastair Young

1.4k
16
6
10
A 3D-printed 10000 : 1 gear reducer and control hardware used for astrophotography
Project Owner Contributor

Astrophotography Camera Mount

ChrisChris

712
9
3
12
RAP is aimed at developing from scratch - ie no ROS - the HW and SW of a four-leg robot with sensors enabling an autonomous walk.
Project Owner Contributor

RAP an autonomous quadruped robot

Philippe EliePhilippe Elie

349
6
0
6
building a quadruped robot with sg90 micro servos
Project Owner Contributor

Quadruped spider robot

MarioMario

293
5
4
4
An open source FPGA-based human whistle MIDI controller.
Project Owner Contributor

WhistleSynth

Michael ErberichMichael Erberich

View all

Share this profile

Share

Bits

Send a private message to shane.snipe

Become cool instantly

Create your Hackaday.io profile like shane.snipe and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2019 Hackaday

Report user as inappropriate

You are about to report the user "shane.snipe", please tell us the reason.