0%

0%

hadji.yohan

I'm Yohan H, 16, and working on few space related project R2Home - SuperAntennaz

Grenoble

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/28/2020.

My Projects

GPS Guided Parachute Recovery System

R2Home

Things I've Built

R2Home

R2Home allow any payload in free fall to guide automatically its return to the ground and land on a precise location

SuperAntennaz

SuperAntennaz is an antenna rotator designed for satellite traking.

Projects I Like & Follow

IP over 430MHz Ham Radio, 50 to 500kbps, 20W RF. Extension for HSMM-Hamnet-AREDN. 100% open-source.

NPR New Packet Radio

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

Damian Lickindorf

Breaking the encryption on the Lerdge series mainboards so I can try porting Marlin 2.0 to it.

Lerdge 3d Printer Mainboard Hacking

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

Internet radio and BT speaker in a small form factor with minimalistic user interface

ESP32-based internet radio and bluetooth speaker

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

Benjamin Prescher

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

oshpark

Wristwatch form-factor conference badge

Open Hardware Summit 2020 badge

oshpark oshpark

Hackaday Prize 2019

We are seeing a lot of drones that have obstacle avoidance and hand control feature, is a toy or video drone. Let's learn it!

Make a Hand Control Drone

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

A custom Kerbal Space Program Controller so that my kid (myself) can launch rockets.

Kerbal Space Program Controller

This workshop is focused on reverse engineering and utilizing hardware-level debuggers.

Remoticon: The Hackers Guide to Hardware Debugging

In this workshop, we'll make 3 different kinds of origami shapes.

Remoticon: Making Glowy Origami

Considerate conservation and climate science is on the horizon. These robots are developed to work in multi-species flocks for GOOD!

Project Bird Fish - Free Flight Robotics

The Sonos Remote Station describes my first steps in freeform electronics.

Sonos Remote Station

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

this is easy project with simple 8 blocks How to Build your Own Spectrum Analyzer software using GNU-RADIO Companion under Win10 easy !

Build Your Own Spectrum Analyzer GNU RADIO Win10

View all

Bits