0%

0%

river

Saya ingin menjadi seorang hacker handal dalam bidang saya sendiri yaitu dunia hacking

Toboali

Following Follow me

Similar accounts worth following

This user joined on 04/06/2019.

Projects I Like & Follow

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

Portable Hacking Unit: Raspberry Pi 3 running Kali Linux with 7" Touch screen and Hak5 Wifi Pineapple.

Pineapple Pi

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion-mclionhead lion mclionhead

Fully open source remote control for common electric skateboards using the NRF24L01+

Open esk8 Remote - v1

timo-birnschein Timo Birnschein

An effort to decipher MIDI disks from the 1990s

Hacking Yamaha Disklavier Floppies

tom-nardi Tom Nardi

A 16x7-Segment LED Clock that syncs time from GPS satellites.

gps_clock

World’s largest self-assembly style CO2 laser cutter and engraver equipped with CO2 laser tube with cutting area 105*63cm.

Open source CO2 Laser Cutter

Board design which makes it easy to attach LED light strips (APA102). No soldering is required by the maker who is using this board

Board for modular LED wearables

sander-van-de-bor Sander van de Bor

Commander un relais iot avec ESP-01 via SmartThings

Relais ESP-01 iot sur SmartThings

erik-tellier Erik Tellier

I'm attempting to recycle my household plastic into usable 3D printer filament

Recycling Household Plastic for 3D printing

The 2018 Hackaday Prize

I was bored with synthesizers, but still wanted to make electronic music. So I build a lot of techno music robots!

Making Techno with Music Robots

moritz-simon-geist Moritz Simon Geist

Small AVR-ISP Programmer

AVRFT234

Launch Paper Air Rockets Remotely from a Web Page

Remote Paper Air Rocket Laucher with ESP8266

paul-mccabe Paul McCabe

Design of involute gear tooth profiles and hints and tips for 3D printing real gears to do work.

3D Printing Gears and a Planetary Gearbox

I created a clock that runs to 2,147,483,647 Trillion years, at which point it will roll over to 0. BIGBANG, EEPROM, CURRENT TIME, included.

A Trillion Year Clock.

Breadboard friendly breakout board for the LT1028 ultralow noise op amp

Low Noise Op Amp Breakout Board

daves-dev-lab Dave's Dev Lab

Attiny45 controlled Solarmotors turn small muffin paper cups. The circuit is mounted directly on the wall, with Aluminium and copper tape.

Zeit für Ellerton / Time for Ellerton

View all

Bits