Close
0%
0%

ZodGilla

Learning robotics and A.I

Edmonton
Following
Send a private message
Similar accounts worth following
1 Followers
36 Following
0 Projects
0 Likes
zodgilla
Send a private message

This user joined on 04/27/2020.

26.5k
5k
16
180
Micro Smart LiDAR Sensor
Project Owner Contributor

MappyDot

BleckyBlecky

15.7k
2.3k
0
23
An LED desk clock driven by NTP on a Pi Zero W
Project Owner Contributor

Raspberry Pi Zero W desk clock

Nick SayerNick Sayer

8.1k
3k
3
8
Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.
Project Owner Contributor

Solar & supercap charged LoRaWAN IoT device

PMBNLPMBNL

5.1k
2.4k
8
67
Building a robot car with a smartphone at its heart.
Project Owner Contributor

DeepRC Robot Car

Piotr SokólskiPiotr Sokólski

4.8k
3.4k
15
45
Yet another open source platform for drones, but this one is fully integrated and uses the SAME70@300Mhz x2 + a Pi Compute Module
Project Owner Contributor

Open Source All-In Drone-Droni SAME70Pi (Kopernik)

Laetitia BELLaetitia BEL

4.3k
2.4k
4
55
We are seeing a lot of drones that have obstacle avoidance and hand control feature, is a toy or video drone. Let's learn it!
Project Owner Contributor

Make a Hand Control Drone

metehanemlikmetehanemlik

2.5k
1.7k
3
4
An LCD touchscreen you can mount into a standard North American work box in place of a light switch for Home Automation control
Project Owner Contributor

HASwitchPlate

lumaluma

2.4k
1.6k
0
5
A smart Bluetooth speaker which has features like 8 pt. FFT Spectrum Analyzer and Weather Monitor
Project Owner Contributor

Smart Bluetooth Speaker with Spectrum Analyzer

Vishwas Navada BVishwas Navada B

2.1k
1.8k
3
9
ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.
Project Owner Contributor

IOT ModbusBox

luisgculuisgcu

2k
2k
0
7
Using Hardware and software to create the programming building blocks.
Project Owner Contributor

Rosetta stone of hardware programming

FourthLevelMfgFourthLevelMfg

1.5k
1.1k
3
1
Use Raspberry-Pi DPI hardware to drive four chains of RGB LED panels.
Project Owner Contributor

Improved Raspberry-Pi RGB Matrix Driver

Robert RouquetteRobert Rouquette

1.4k
5
4
5
Tethered Drone From Syma X56 proof of concept
Project Owner Contributor

Hacking Syma X56W

night.dav3night.dav3

1.4k
1.4k
0
6
Coin-cell operated, wireless IoT soil moisture sensor using mcThings! Alerts, status levels, temperature!
Project Owner Contributor

Wireless IoT Soil Moisture Sensor Using mcThings!

mcThingsmcThings

1.4k
24
0
15
Pixhawk Flight Control Unit based autopilot with Raspberry Pi Computer Module 3 and all other requied sensors, modules built-in.
Project Owner Contributor

Drone Autopilot with Raspberry Pi CM3 .

Akio SatoAkio Sato

1k
1k
0
2
how to setup Phabricator on a raspberry pi 3B+ with a RAID on usb sticks to store the data somewhere else than on the SD card
Project Owner Contributor

Phabricator on raspberry pi

NathannNathann

397
397
0
1
Raspberry Pi based Home Automation Manager
Project Owner Contributor

Northcliff Home Automation Manager

rifowlerrifowler

304
284
0
5
Universal control board for rapid prototyping of robots based on ESP32.
Project Owner Contributor

RBControl

Jan MrázekJan Mrázek

208
208
0
3
The barometric control of the drone is lagging if there is any wind outside. So I decided to modify it.
Project Owner Contributor

Syma X56W barometric mod

Lanet1Lanet1

View all

Share this profile

Share

Bits

Send a private message to ZodGilla

Become cool instantly

Create your Hackaday.io profile like ZodGilla and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2022 Hackaday

Report user as inappropriate

You are about to report the user "ZodGilla", please tell us the reason.