0%

0%

Mirko

Maker, freelancer, hardware/PCB designer, hardware hacker, PCBA developer

Poland

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/10/2021.

My Projects

Yet another Raspberry Pi Computer (non-official carrier board for CM4).

MirkoPC -> CM4 carrier board

First in the world dedicated RPi platform for full node bitcoin (BTC) and Lightning Network

BitPiRat Computer (GEN1)

First dedicated RPi platform for full node Bitcoin and Lightning Network

BitPiRat Computer (GEN2.0)

Smallest Raspberry Pi CM4 carrier board with full 40-pin GPIO header

PicoBerry (tiny CM4 carrier board)

High-performance PCIe x4 (64P) to M.2 M-Key 2280 NVMe adapter.

PCIe x4 to M.2 M-Key 2280 adapter

A dedicated card for the Raspberry Pi CM4-IO board -> PCI Express x1 to M.2 M-Key 2280 (PCIe NVMe) adapter

PCIe x1 to M.2 M-Key 2280 adapter

View all 7 projects

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

Hackaday Prize 2019

Blackbox shifts 3D printing towards a multitool manufacturing robot.

Multitool 3D Printer - Blackbox

A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.

Minimal Raspberry Pi CM 4 Carrier

Prof. Fartsparkle

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

The 2017 Hackaday Prize

4 Digit Nixie Clock driven by Raspberry Pi Zero and Arduinix board.

Raspberry Pi Zero Nixie Clock

The 2017 Hackaday Prize

A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier.

DIY Polishing Station for 3d-printed Parts

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

Use a Raspberry Pi to build an EV charging station

Raspberry Pi EVSE Hat

oshpark

Wristwatch form-factor conference badge

Open Hardware Summit 2020 badge

oshpark oshpark

Single layer breakout board for the RPI CM. Mostly a learning exercise for myself.

Crappy Raspberry Pi Compute Module Breakout

Prof. Fartsparkle

Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.

3D Printed Chamfer Tool

A OSHW Raspberry Pi CM4 carrier board in Arduino/Metro formfactor for electronics prototyping

Piunora

Prof. Fartsparkle

A retrocomputer and CPU exerciser for classic 8-bit CPUs.

SDC_One

Bits