0%

0%

Aidan Chandra

Stanford Class of '23 - Electrical Engineering / Intern summers at a tech startup as an Electrical and Software Engineer

Bay Area, California

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 07/20/2020.

Projects I Like & Follow

The 2018 Hackaday Prize

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

Smart Motor Driver for Robotics

Monitor the emission of toxic chemicals from 3D Printing

Smart 3D Printer Emission Monitor

One Radio to rule them all Wifi, Bluetooth, nRF24l01p, CC2500, A7105, CYRF6936

Multiprotocol Radio

Spectre Spectre

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

Using an op-amp in an audio amplifier circuit and optimizing it.

Desiging An Audio Amplifier

Hackaday Prize 2019

Omnidirectional 3D printer for... Houses?

Omniprinter - #Swarm 'Large Scale 3D Printing'

Using an ESP8266 programmed with the Arduino IDE to drive voltmeters to make a clock

ESP8266 WIFI NTP VOLTMETER CLOCK

Take an small robotic arm (MeArm) and a dev board with more processing power than necessary (Jetson TX2). What could go possibly go wrong?

Ty the Typing Robot

How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.

Extreme Low Frequency Signal Generator

"New technology in the old case" A Raspberry Pi based squeezeelite client for the logitech media server

Squeezelite client - Raspberry Pi Retro Radio

Benjamin Prescher

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

This is going to be a long and hard project - and a really expensive one too. I'm happy to take you along for the ride!

(Exosuit?)/VR Controlled Bot

FM Radio with RDS based on ATtiny85

TinyFMRadio

Cheap target kettle gets the IoT treatment

IoT Kettle Australia

A follow-up tutorial to Pi Project 001, where a RAM Copper Heatsink is now added to the back of the Raspberry Pi, providing greater cooling.

Raspberry Pi RAM Copper Heatsink Setup

A fully functional portable laptop in a lunchbox

Raspberry Pi Lunchbox Laptop

Complete integration test between the IoT Ubidots platform and the LOGO! by Siemens using Node-RED running on a Raspberry Pi

integration test IoT Ubidots with LOGO! Siemens

Orange Pi 2g IoT based GSM PBX using Asterisk

Orange Pi 2g IoT based GSM PBX using Asterisk

View all

Bits