0%

0%

Alex Tsamakos

Software and Hardware Engineer, CTO at Actinius

Amsterdam, NL

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/31/2019.

My Projects

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

FeatherWing (/Feather base) for enabling any Feather-compatible board to interface with RS232/RS485 or different voltage UART.

RS232/RS485 and Level Translator FeatherWing

A FeatherWing for air-quality, light, pressure, humidity, and temperature measurements, featuring also SD Card and Grove connectors.

Environmental Sensor FeatherWing

Projects I Like & Follow

Internet radio and BT speaker in a small form factor with minimalistic user interface

ESP32-based internet radio and bluetooth speaker

A compact modular design of the strain wave gear for general robotic applications.

Compact Strain Wave Gear Actuator(s)

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion-mclionhead lion mclionhead

Put your Verilog on real hardware, real cheap

FPGA Bootcamp #3

al-williams Al Williams

Raspberry Pi 3B based robot, distance sensors, and ROS.

Wall Following and Obstacle Avoidance

sinclair-gurny Sinclair Gurny

The 2018 Hackaday Prize

A hardware and software balancing cart pole.

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zucker Philip Zucker

Stuck between the choice of mobile, low power VR and stationary, PC grade escapism, the best choice was clearly to mash the two together.

Upgrade-Ready Virtual Reality Backpack

Take an small robotic arm (MeArm) and a dev board with more processing power than necessary (Jetson TX2). What could go possibly go wrong?

Ty the Typing Robot

elecia-white Elecia White

World’s largest self-assembly style CO2 laser cutter and engraver equipped with CO2 laser tube with cutting area 105*63cm.

Open source CO2 Laser Cutter

Yet another wireless network of environmental sensors in a home

Home environment monitor

Ultrasonic distance monitoring using HC-SR04 sensor, Arduino WiFi and AskSensors IoT cloud

Distance monitoring with Arduino & AskSensors IoT

Display Temperature on LCD Using an Arduino

Arduino LCD Temperature Controller

timothy-coyle Timothy Coyle

Blast your enemies from a safe distance !!!

Bluetooth Nerf turret

little-french-kev little french kev

Multi-Functional Custom Robotic Research Platform

PROJECT MOOBA

nebra-labs NEBRA Labs

The 2018 Hackaday Prize

https://github.com/mhe747/dawnboard/wiki

BeagleSDR

mich-mich Mich Mich

People don't know what it's like to have a handicap, that's why our project was made, to try to understand.

Empathy squad

An ongoing experiment in #DataInterfaces

DOM Glove

aleksandar-bradic Aleksandar Bradic

Hackaday Prize 2019

This is an open-source hardware project for a device that outputs a certain voltage depending on where the rope/wire is bent.

Read Rope / Electronic Nerve

pablo-antonio-camacho-jr Pablo Antonio Camacho Jr.

View all

Bits