0%

0%

Antonin

Maker, self-taught electronic engineer

Lyon, France

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/08/2020.

My Projects

A powerbank with USB-C Power Delivery and 4S 18650 charger / BMS

Si⅃O - USB-C OPEN SOURCE POWERBANK

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

USB Power Delivery Based Lithium Polymer Battery Charger

LiPow - The USB C LiPo Battery Charger

alex-klimaj Alex Klimaj

The 2015 Hackaday Prize

LiFePO4 battery technology, made easy for makers

LiFePO4wered/USB

patrick-van-oosterwijck Patrick Van Oosterwijck

A USB-C PD Sink up to 20V 5A based on the Cypress CYPD3177 USB PD Controller

USB-C Power Delivery Sink - CYPD3177

This project is aMicroUSB powered ESP8266 Oled Display. It can be used to display Weather Information or Wifi SSID Information.

MicroUSB powered ESP8266 Oled Board

0miker0 0miker0

The 2016 Hackaday Prize

Designing hardware is difficult. We Have a hardware platform that generates schematic and layout design files in a typical 10 minutes time.

Simplify Embedded hardware designs

makarand-kapoor Makarand Kapoor

I'm tired of flying insects and chasing after them....

Lazy Killer 9000

USB Type-C/PD Analyzer is an Open Source Hardware/Software tool that helps you test, debug and explore USB Type-C/PD Devices.

USB Type-C/USB PD Analyzer

Gain all benefits from using Raspberry Pi with Windows 7 apps

Raspberry Pi with Windows 7

Hackaday Prize 2019

An USB super speed Type C to Type A adapter which can extract the USB PD signal of the Type C port and use it e.g. for charging.

USB 3.1 Type C to Type A Adapter with PD

jakob-faltisek Jakob Faltisek

Hackaday Prize 2019

Power Stacker is a portable, modular, and configurable USB rechargeable lithium-ion battery pack system.

Power Stacker: Stackable Battery System

The 2017 Hackaday Prize

Z-Wave development board Z-Uno + Touch pad detector chip TTP223 + Livolo glass + Batteries CR2032

Create Z-Wave capacitive touch switch on batteries

vitaliy-yurkin Vitaliy Yurkin

Nice little all-Band radio easy to build

DIY Arduino+Si4730 All band receiver(LW,MW ,SW,FM)

mircemk mircemk

Get notified when your washer and dryer finish.

Easy Laundry Monitor

adam-demuri Adam Demuri

Talker/80 - New Dimensions in Voice Synthesis for the TRS-80

Talker/80 for the TRS-80 Model 1, 3, and 4

michael-wessel Michael Wessel

Buck boost regulator module that supports 3.5V-24V input, charging 1-4 cell batteries, and programmable output from 4.48V to 20.8V

BQ25703A Programmable Regulator Module

alex-klimaj Alex Klimaj

Combination of USB-C PD Trigger and Buck Converter

USB-C PD Buck Converter

stefan-wagner Stefan Wagner

We established this project in order to perform some Robotic skills. PICTO92 is a mobile line follower robot

Line Follower Robot (PICTO92)

diy-guy-chris DIY GUY Chris

View all

Bits

Patrick Van Oosterwijck wrote 11/26/2020 at 20:45

Hi, thanks for your interest in my #LiFePO4wered/USB project!

Are you sure? yes | no