0%

0%

florin

dornic de cunostinte noi

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/13/2021.

Projects I Like & Follow

The 2015 Hackaday Prize

Developing a small fuelless microwave thruster

EMDrive/satellite

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

Yes! You can now have "Alexa" do what you want, when you want, by using a Raspberry Pi.

Amazon Echo Voice Command Automation

gamaral gamaral

A portable Yagi antenna for working amateur radio satellites

WA5VJB ultra portable dual VHF/UHF Yagi

The 2016 Hackaday Prize

tracking CubeSats faster, anywhere and anytime for everybody!

The Distributed Ground Station Network

This is the Satellite Antenna Rotator mechanical system for my step motor driver board project.

Satellite Antenna Rotator Mechanical System

Reverse Engineering Bluetooth Data

Bluetooth Data Owon B35T Multimeter

This is a demo project for my Bluetooth Low Energy Mesh Protocol using a simple nRF51822 based board

Bluetooth Low Energy Mesh Protocol

Using a terminal from 1976 as home automation hub. Because we can.

ADM-3A Dumb Terminal Home Automation Hub

Daniel Karpantschof

The 2017 Hackaday Prize

A portable Raspberry Pi that you can access with your smartphone and use as a Bluetooth receiver to stream music to a pair of speakers.

Portable Raspberry Pi Bluetooth Receiver/Player

800W Continuous/1000W Peak SMPS Power Supply Audio

SMPS IR2153 With Short Circuit Protect, Utsource

Electroniclovers123

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Powered from the 24v control circuit of a garage door opener. It can control the door and sense if the door is open/closed

Wi-Fi Garage Door Opener For Home Automation

2021 Hackaday Prize

A resilient strip (of tape measure fame) triad fed through centrally driven rollers extends a structure constrained by self spacing ribs

OBoom: low cost deployable linear actuator

how to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

Home Automation Using Blynk & ESP32 IoT Project

Using AT commands we can change name,bud rate etc of Bluetooth module(hc-05,06)using some simple steps.

Change your Bluetooth properties using AT commands

I made a simple antenna, used cheap TV Tuner and with such hardware controlled via some software I was able to pick satellite signals/images

Recieving the earth's photos from real satellites

2021 Hackaday Prize

an automation cleanup mechanism that can clean and collect the piled up Sargassum in both shore land and water.

Caribbeans Sargassum Problem 4.0

View all

Bits