0%

0%

Arthur

Old dog, but I am (still) having fun with electronics.

Alberta

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/12/2020.

Projects I Like & Follow

A simple point-and-shoot near-IR camcorder built with a raspberry pi

Near-IR Camcorder with a Raspberry Pi

A touchscreen control panel for Grbl controllers with MPG handwheel and hardware inputs.

Touchscreen Control Panel for Grbl

uriah-liggett Uriah Liggett

Build a complete LW, MW and SW (AM and SSB) radio with the Si4735 / SI4732 and Arduino.

Si4735 SSB Receiver Controlled by Arduino

ricardo-lima-caratti Ricardo Lima Caratti

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Hackaday Prize 2019

An open-source Arduino compatible remote controller (transmitter) with many customization options for robots and drones.

Alpha V1: Open-Source Remote Controller

alireza-safdari alireza safdari

An ongoing exploration and experiment about the use of small magnetic loop antennas for QRP (low power) Amateur Radio.

Magnetic Loop Antennas for QRP Amateur Radio

mark-dammer-mm0dqm Mark Dammer MM0DQM

Supplyframe DesignLab: 2023 Hackada…

Keep an eye on your home's power consumption with style.

Smart Powermeter

Hackaday Prize 2020

Augmenting materials with electrical properties ⚡⚗️

PolySense

The 2017 Hackaday Prize

Fully 3D-printable electric longboard drivetrain with built-in idler system.

3D-Printed Electric Longboard

yowhwui yowhwui

Full Linux PC in 2x2cm module

Hane SOM module

The 2018 Hackaday Prize

Model and 3D print a mold to create a silicone rubber "skin" lattice for an easy to make custom prosthetic hand that matches your 3D scan

3D Scan to Custom Soft Prosthetic Hand

curt-white Curt White

The 2018 Hackaday Prize

Using an Wemos D1(esp8266), cheap power supply, a switch, and a temp sensor you can automate anything

Home Automation on the Cheap V2

Measure air particulate density levels for PM1 PM2.5 and PM10 on Raspberry Pi and OSx

USB connected Laser particle detector for IAQ

The 2018 Hackaday Prize

Educational Robotics platform merging Cardboard and Electronics

BOXBOTICS

pure-engineering Pure Engineering

The ShopArm is an easily implemented robot arm. Just train it and then use it

ShopArm: A Practical 3D Printed Robot Arm

The ability to process, manipulate and otherwise work with audio signals is a key feature of DSP in FPGA. Here's a look at how we do this!

Audio Processing with the Snickerdoodle

adam-taylor Adam Taylor

Small AVR-ISP Programmer

AVRFT234

Use 3D printing to solve the “Growing Chaos” problem

Germinate Seeds With a 3D Printed Container

View all

Bits