0%

0%

Benjamin Casto

KM4JCQ

Charlottesville, Virginia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/14/2016.

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

Miguel Ayuso Parrilla

Hackaday Prize 2020

Ground Penetrating Radar using Arduino

GPRino

A portable, rugged, self-contained system to suit all your RF SIGINT needs in every environment.

Raspberry Pi SDR Cyberdeck

2021 Hackaday Prize

A physical switch for my computer to choose between Linux and Windows

Hardware boot selection switch

Stephen Holdaway

Supplyframe DesignLab: 2022 Hackada…

This radio receiver is capable of receiving all MW and SW bandwidth, and can also operate as an SDR receiver, so with the help of PC and app

DIY SW , MW , Retro look Radio with ESP32/Si5351

mircemk mircemk

2021 Hackaday Prize

the FIRST Single-board DIY 8-bit Personal Computer with VGA, Mice, Ethernet and Printer support, GPIO and CP/M powered!

CRISS CP/M 8-bit Homebrew DIY Computer (AVR based)

46 cm in height, but 6.2 m deep

Emergency Exit Coffee Table

2021 Hackaday Prize

Yet another overkill project. An attempt at building a portable and versatile GCS for robotics.

Robotics Ground Control Station

Maximiliano Palay

2021 Hackaday Prize

This project focuses on the development of open-source, low-cost, waterjet-powered robotic speedboats for education and research

Low-Cost, Waterjet-Powered Robotic Speedboats

“If you teach a person how to make an oxygen concentrator, they will go on to save a village!” Open source hardware oxygen concentrator

M19O2 Oxygen Concentrator

Anool Mahidharia

A simple square wave oscillator built using 1/6 of an SN74HC14N Hex Schmitt Trigger, using Intellijel/Doepfer Eurorack design specifications

SN74HC14N Single Oscillator, Version 2

Hackaday Prize 2020

Covid-19 and Flu, 3d Printed and Vacuum Formed for Cerebral Palsy, Hearing Impaired, Deaf, Autistic and Elderly

Clear N95 + Mask , 3d Printed & Vacuum Formed

Custom Spot Welder machine based on MOT

Spot Welder

FFT spectrum analyzer is an test equipment that uses Fourier analysis and digital signal processing techniques to provide spectrum analysis.

DIY FFT Audio Spectrum Analyzer

mircemk mircemk

This is the second version of a device I designed to alert me in the unfortunate event the nozzle clogs. It communicates with the printer!

3D Printer Clog Detector V2

A cute colour-changing LED tiara.

Circuit Sculpture LED Tiara

Alexandra Covor

This is my homemade version of the Wahoo Kickr Climb

Zwift Indoor Bike Gradient Simulator

Pointlessly Useful

The ENVIII unit is connected to the M5Stack and calculates the discomfort index and display graph.

M5 disconfort-Index Meter

View all

Bits

Alexander wrote 07/15/2020 at 21:17

Thanks for the follow on my projects! :)

Are you sure? yes | no