0%

0%

Baireid

innovate

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 12/27/2020.

Projects I Like & Follow

K3lso is a quadruped robot similar to MIT mini cheetah and MIT Cheetah 3.

K3lso Quadruped

robin-frjd Robin Fröjd

The 2018 Hackaday Prize

Relax, your home knows which appliances to switch on. Justifying "Automation" in low cost Home Automation systems.

Dexter - The New Age Home Automation

aditya-mukherjee Aditya Mukherjee

The 2017 Hackaday Prize

Identify Car license plates with Raspberry Pi Python + PHP + Telegram

Smart Gates

Hackaday Prize 2019

We are seeing a lot of drones that have obstacle avoidance and hand control feature, is a toy or video drone. Let's learn it!

Make a Hand Control Drone

The circuit for Audio Amplifier is made on Vero-board which stimulates and amplifies the input sound by using a battery.

How to make Audio amplifier with 2N7000 MOSFET

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

LoRa 2.4Ghz module used in full duplex mode, sending/receiving MavLink telemetry data

LoRa 2.4 Ghz for drone telemetry

akio-sato Akio Sato

A first attempt for a small, attractive and practical soldering station, a project designed not by the cost but rather the experimentation.

AVR Soldering Iron

Successfully adding external audio to the badge "on a breadboard" but then bricking it when adding it permanently.

Hacking the LayerOne 2017 badge for audio... #fail

The 2018 Hackaday Prize

use the natural, stable temperature of the ground to power garden lights and sensors via a thermoelectric device

Geothermal Energy Harvesting Garden Lights

trey-core Trey Core

Hackaday Prize 2020

We show how to build IOT WiFi Motion Sensor powered on a battery with email notification over IFTTT.

WiFi Motion Sensor (3D print) - DIY

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

The ability to process, manipulate and otherwise work with audio signals is a key feature of DSP in FPGA. Here's a look at how we do this!

Audio Processing with the Snickerdoodle

adam-taylor Adam Taylor

Battery is dead so the bench supply jumps in

Bench Supply Bluetooth Speaker

mike-szczys Mike Szczys

The ZS1100A is a USB based DC power supply designed to measure the power consumption of IOT devices. It is an improvement over the ZS-2102-A

ZS-1100-A IOT Power Meter

prajay madhavan

2021 Hackaday Prize

IoT Nixie Clock can be controlled via Arduino Cloud or Amazon Alexa thanks to the Arduino Nano 33 IoT.

Voice Controlled Nixie Clock - Alexa & IoT Arduino

marcin-saj Marcin Saj

How to Make a 700W AUDIO SMPS NEW VERSION?

700W AUDIO SMPS NEW VERSION, Utsource view

Electroniclovers123

I will get back to this! Haha it works I promise!

LED CUBE WITH ARDUINO UNO

View all

Bits