0%

0%

FURKAN

DIY hobby product

turkey

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/09/2019.

My Projects

Robotic projects you want to do with Arduino are now very easy. All you need is makerbot. For more information, please watch the video.

MakerBOT - Training Robot Kit

Projects I Like & Follow

Thanks to the hardwork by Richard Sloan and Ivan Grokhotkov, we can now use Arduino IDE to write sketches that would run ON the ESP8266.

Arduino IDE for ESP8266 Quickstart Guide

Open source, easy to assemble type of DIY laser cutter and engraver. http://en.smartdiys.com/smart-laser-mini/

DIY Desktop Laser Cutter

The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education

LittleArm: 3D Printed Arduino Robot Arm

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

The 2016 Hackaday Prize

Decentralized Autonomous Interconnected Systems for Energy Efficiency - A blockchain based energy DAO

[2016] InternetS of Energy - Call me DAISEE

5W portable speaker with Bluetooth module

Portable Stereo Speaker

Driving controller-less graphics LCD with Arduino

Arduino CLGLCD

A Z80 experimenters board with a supervisory AVR and 64K of SRAM

ZAViouR Board - AVR/Z80 Hybrid

Scrap parts assemble to rescue stuff stuck in tree

U.S. Water Rockets

The 2015 Hackaday Prize

small seven segment display for plugging on an ISP programming header of an Atmel Board or an Arduino

tiny7

A 7 segment display Arduino clock with RTC, alarm and brightness control.

Yet Another Arduino Clock

I made a tool that converts an image into multiple PCB layers - pixel brightness to board opacity. (for use with Eagle)

PCB - Art medium

World’s largest self-assembly style CO2 laser cutter and engraver equipped with CO2 laser tube with cutting area 105*63cm.

Open source CO2 Laser Cutter

Hanging WS2812 strips from a tree like glowing icicles. A few modes for fun.

LED Icicles

IoT Rapid prototyping platform : Atmega328P at heart | ESP-01 + Xbee radio | Sensors - DS18B20 + LDR | Enough GPIOs

Arduino Enabled : (ESP8266) WiFi & Xbee IoT Board

Plug & Play Hardware + Software Interface for Real-Time DMX and MIDI control through brain signals

NeuroLS System

Hackaday Prize 2019

A breadboard that can be (re)programmed to wire itself.

A Programable Breadboard

View all

Bits