0%

0%

Alberto

I am an electronic enthusiast, with programming skills.

Milan, Italy

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 08/25/2020.

Projects I Like & Follow

Hackaday Prize 2019

Homemade 8MHz Z80 SBC, 128kB banked RAM, RTC, SD (HD emulation), Basic and Forth interpreter, CP/M 2.2 and 3, UCSD Pascal, Fuzix and more...

Z80-MBC2: a 4 ICs homebrew Z80 computer

While you could use a WiFi shield, or one of the many, many, ESP8266-equipped 'duinos out there, why not just make your USB cable WIRELESS?

Wireless USB for Instant IoT

thane-hunt Thane Hunt

An easy to build homemade single board computer with a V20HL aka uPD70108H (8088 + 8080) or 80C88 CPU. CP/M-80, CP/M-86 and MSDOS supported.

V20-MBC: a V20 (8088 + 8080) CPU homebrew computer

The 2016 Hackaday Prize

tracking CubeSats faster, anywhere and anytime for everybody!

The Distributed Ground Station Network

The 2016 Hackaday Prize

µController, CC1101 module and LCD forming a small communication device. Other probable uses in the near future.

Waffle: a pocket-sized digital radio system

mdasilva M.daSilva

This is the Satellite Antenna Rotator mechanical system for my step motor driver board project.

Satellite Antenna Rotator Mechanical System

Multi-emulation color stand-alone RS232 video terminal with sounds using an ESP32 and the FabGL library.

uTerm2-S: a multi-emulation color RS232 terminal

The 2018 Hackaday Prize

Musical Project that converts low frequency waves from the magnetosphere into sound.

Natural Radio Music

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

The 2018 Hackaday Prize

A hardware and software balancing cart pole.

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zucker Philip Zucker

Electronic load that supports 3.3V-16V at 1A of current. Equipped with keypad, LCD, rotary encoder, STM32 Microcontroller and more!

Electronic Load 3.3V-16V 1A

The 2017 Hackaday Prize

An open-source, 4-channel differential dynamometer for post-stroke rehabilitation. Includes 4 force sensors, device with display and PC soft

Dynamometer for Post Stroke Rehabilitation

sergei-v-bogdanov Sergei V. Bogdanov

Augmented Reality and User Defined Target using Vuforia

Augmented Reality and User Defined Target Vuforia

edgaras-art Edgaras Art

This programmer is only 3 cm long and 1 cm in diameter. It is so small, it can be builtin din-6 plug

Smallest AVR ISP Programmer

RT-X

Small AVR-ISP Programmer

AVRFT234

Circuit sculpture using electroforming for organic-ish blinkenlights

circuit sculpture Fail-o-rama

An Arduino ProMicro using a GPS module to get the time, and then show it on a vintage NSA1166 LED display. Also: a bit of freeform :)

Orbital Atomic Clock Downlink, or you know, a GPS.

robotto Robotto

View all

Bits