0%

0%

cpapanik

A complete noob looking to expand my horizons and get my hands dirty

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/08/2020.

Projects I Like & Follow

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

phil-handley Phil Handley

Monitor the emission of toxic chemicals from 3D Printing

Smart 3D Printer Emission Monitor

gary-peng Gary Peng

A cheap alternative to more expensive BLDC controllers, where only simple operation is required. More features may be added as required.

Modified ESC for Bidirectional BLDC Control

M-Bus Shield for smartmetering with Arduino MKR

Arduino M-Bus Master Shield

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

Build an Arduino Home Automation System that can control electrical devices like lights, fans, garage doors etc using our mobile phone.

Home Automation Step by Step using Wemos D1 Mini w

jithin-sanal Jithin Sanal

2021 Hackaday Prize

A companion for your cats and dogs.

Zakhar the Robot

andrei-gramakov Andrei Gramakov

The 2018 Hackaday Prize

Unique, compact power conditioning enables always-on sensor monitoring and Long-Range radio (LoRaWAN) link for IoT applications.

SoLoRa - Solar Powered always-on IoT sensor node

joe-miller Joe Miller

This display accomplishes an impossible task : everyone, in all directions, has the impression that the display is following him !!!

Omnidirection Display

Hackaday Prize 2019

Teach elementary and middle-school students about robotics with a DIY battle bots kit.

Educational Battle Bots

misty-lackie Misty Lackie

The 2018 Hackaday Prize

Using an Wemos D1(esp8266), cheap power supply, a switch, and a temp sensor you can automate anything

Home Automation on the Cheap V2

Hackaday Prize 2020

We show how to build IOT WiFi Motion Sensor powered on a battery with email notification over IFTTT.

WiFi Motion Sensor (3D print) - DIY

Look mom, no MCU!

All-hardware frequency meter and LCR

The 2017 Hackaday Prize

An open-source robot developing environment that helps inventors build low-cost robots without having to start from scratch.

Robot Building Kit and Development Environment

ted-huntington Ted Huntington

I'm 16 and I built an open source VR headset for $100

Relativ - Build your own VR headset for $100

maxime-coutt Maxime Coutté

Underwater drone i-GOR + Float station

UNDERWATER DRONE i-GOR

roman-weitendorf Roman Weitendorf

With a DC barrel connector, you can use this wing to power your feathers, measure solar current and keep track of charge with a fuel gauge.

Feather Solar Wing

axel-mansson axel mansson

Personal health IoT device to record health parameters daily and sync them with your doctor.

Health@Home

View all

Bits