0%

0%

burbanshipley

I'm a post-secondary student looking to make some cool stuff and hopefully start some little projects of my own someday.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/31/2020.

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

Damian Lickindorf

A portable, rugged, self-contained system to suit all your RF SIGINT needs in every environment.

Raspberry Pi SDR Cyberdeck

2021 Hackaday Prize

A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.

MiniHawk VTOL

Universal enclosure that can be used as a lab power supply, soldering station or combination of two.

Modular PSU & Soldering station

2021 Hackaday Prize

A 2.5kW solar generator designed for overlanding and outdoor adventures in mind.

Rugged Solar Generator 2.5kW

Philip Ian Haasnoot

A one stop shop with fixed 5V/12V/24V/USB metered power, adjustable power supply, voltmeter, continuity tester and basic oscilloscope.

Basic Hacker MultiBench

A 3D-printed nozzle for Trotec laser cutters for extra clean cuts

Nervous System Laminar Flow Laser Air Assist

2021 Hackaday Prize

A tactical robot that can traverse the desert environment, video enemy locations and stream the feed back to soldiers on the ground in V.R.

DESERT EYE: Military Surveillance Robot

Build a COVID-19 shield with a device that estimates skin temperature and indicates if a person might have a fever.

Skin Temperature Scanner

Gilbert François

Design and develop a tank with additively manufactured thread and re-using filament spools as wheels

The Innovation Tank -3D Printed Treads-

2021 Hackaday Prize

Fully 3D-printable hydraulics for all your robotics projects

3D-printable double helical gear pump watertight

2021 Hackaday Prize

Yet another overkill project. An attempt at building a portable and versatile GCS for robotics.

Robotics Ground Control Station

Maximiliano Palay

Reduce the wires from more than 19 to only 4

CAN bus Reduce the wires of your 3D printers

2021 Hackaday Prize

An open-source manual pick and place machine for PCB artisans

Pixel Pump Pick & Place

2021 Hackaday Prize

This project focuses on the development of open-source, low-cost, waterjet-powered robotic speedboats for education and research

Low-Cost, Waterjet-Powered Robotic Speedboats

40mm ring with 48 RGB LED made for rotary encoder

RGB LED Ring

I am currently building a 6 axis robot from scratch with 500 mm reach. It is servo driven and features absolut encoders on all axis.

6-Axis Robot from Scratch - Servo driven

This is the second version of a device I designed to alert me in the unfortunate event the nozzle clogs. It communicates with the printer!

3D Printer Clog Detector V2

View all

Bits