0%

0%

kim.muma

network admin

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/30/2020.

Projects I Like & Follow

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

Clyde D. Corpuz

The 2017 Hackaday Prize

Philips Hue is nice but expensive... now there is a cheaper way.

DIY Complete Philips Hue Home Automation

The 2018 Hackaday Prize

printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation

3D Printed Strain Wave Gear

Johannes Hassler

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

Use a small camera equiped vehicle to explore tight but vast spaces. Remotely control by wifi.

Remote wifi video car

The 2017 Hackaday Prize

Control your mobile device remotely without using the touch screen

Tactile Remote Control of a Mobile Device

extended control of heater/pump/blower, costs tracking and preview, alert up-on fault, LED lights add-on

Lay-Z Spa Remote Control

A 16x7-Segment LED Clock that syncs time from GPS satellites.

gps_clock

Make a Raspberry Pi replacement using a Cypress Semiconductor Programmable System on a Chip (PSOC 5)

Not Quite Useless Raspberry Pi Replacement

land-boards.com

The 2018 Hackaday Prize

Software and Hardware to make Word Clocks easier to make

Confagrid

We are going to create an AC Voltage Measuring Device using Arduino, which will estimate the voltage of Alternating Current.

AC Voltmeter using Arduino

hIOTron hIOTron

The goal of this project was to create a device that enables reliable and secure communication using radio transceivers.

Radio Based Secure Communication Network

Hackaday Prize 2020

The New Dexterity Low-Cost Robotic Airship for Education and Research

A Helium-Based, Affordable Robotic Airship

Experimenting with 3D printed tools.

3D Printed Opensource Tools

I will show you how to build a smart video doorbell device with 2-way audio and iOS push notifications, using a Raspberry Pi.

Fast video doorbell / intercom on Raspberry Pi

A tiny virtual machine with a 64 bit RISC CPU.

L1VM

Setting up my old Model B for hardware experiments

Raspberry Pi breakout board

Ken Yap Ken Yap

View all

Bits