0%

0%

bench2004

Late start hacker/maker/tinker

Hong Kong

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/06/2014.

Projects I Like & Follow

Hackaday Prize 2020

Pocket sized ESP32 display board with 180µW Always On Display and Gyro Controls

Low Power ESP32 Handheld

An ESP8266 , a ILI9341 display, a few buttons to build a working ZX Spectrum

ZX Spectrum emulator with ESP8266

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

Benjamin Prescher

Teensy Flight Controller and Stabilization

dRehmFlight VTOL

Making a CD player using an Arduino and IDE CD-ROM drive

Arduino CD player

A Clock style barometer, that displays the current weather with different slides, driven by an arduino, 5 servos a PCA9685 and a bmp280.

Tempestas II, A Clock style Barometer

This is a 8x8 WS2812b NeoPixel LED matrix that is completely flat surface and has the same 1.6mm height as a normal PCB

World's Slimmest NeoPixel LED Matrix

Each axis: $̶5̶$8 motor+lead screw, 3x LM6UU, 3x 6mm x 100mm rod, 1/8in hardboard, PC case screws

Minamil: a minimal CNC mill. And friends.

Hackaday Prize 2020

Marlin Nextion New Interface

3D printer Interface

dannyvandenheuvel

Convert Kicad PCB files into GCode with isolated PCB Nets

PCB Isolation Routing Software

Michael Schembri

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

With a current consumption of only few uA, this thermometer is capable of running for years from single CR2032 (and forever from solar cell)

Ultra Low Power thermometer

Miroslav Hancar

Tensegrity structures aren't just for architects.

Tensigral Lamp

Want a color-angular approach to inspecting your solder joint fillet quality? This rainbow-dome is your solution for less than $20!

DIY AOI RGB Light

A very lightweight representation of the venerable Apollo DSKY. Uses a Touch LCD to bypass all the hardware complexity.

ArDSKYlite

A breadboard adaptor so you can prototype your ESP-01

ESP-01 Breadboard Adaptor

50 Neopixels mounted on the edge of ten PCBs

LED Ball

A very-modern take on the popular late-80s soviet clock.

Elektronika 7-06 clock replica

View all

Bits

Mahesh Venkitachalam wrote 04/26/2016 at 01:00

Thanks for following tinyDriver!

Are you sure? yes | no

danjovic wrote 01/17/2016 at 16:35

Thanks for following Key Pass!!

Are you sure? yes | no

arief ibrahim adha wrote 05/03/2015 at 22:29

thanks for the skull :)

Are you sure? yes | no

Michael O'Toole wrote 12/12/2014 at 11:14

Thanks for following....

Are you sure? yes | no