0%

0%

Carlos

I'm a passionate of technology in general, including the retro and vintage technology too

Tucumán, Argentina

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/20/2021.

My Projects

Running MicroPython on Raspberry Pi Pico using real MSX hardware as console.

MicroPython using MSX Hardware

Reverse engineering an Argentine MSX motherboard from PCB photographs into an interactive circuit explorer.

MSX DPC-200 Motherboard Reverse Engineering

Projects I Like & Follow

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

I will be attempting to build a guided rocket using of the shelf parts

Guided Rocket

The 2017 Hackaday Prize

Quickly identify radioactive materials with a pocket-sized ion chamber. Built from standard parts for easy manufacture and low cost.

Open Radiation Detector

carlos-garcia-saura Carlos Garcia Saura

Microcontroller Audio Workshop & HaD Supercon 2015

paul-stoffregen Paul Stoffregen

Basic energy monitor using the ESP8266 and the ATMega328

ESP8266 Current Monitor

patrick-mcdonnell Patrick McDonnell

The 2017 Hackaday Prize

Philips Hue is nice but expensive... now there is a cheaper way.

DIY Complete Philips Hue Home Automation

mariusmotea marius.motea

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

The 2015 Hackaday Prize

This is an IoT based wireless Home Automation and Security System

Low Cost Wireless Home Automation and Security

sounak-ranjan-das Sounak Ranjan Das

Yet another homebrew computer based on 65C02 CPU

DB6502

dawid-buchwald Dawid Buchwald

A portable Yagi antenna for working amateur radio satellites

WA5VJB ultra portable dual VHF/UHF Yagi

A 3D printed stereotax

3D printed rodent stereotaxic device

lex-kravitz Lex Kravitz

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-woo Timothy Woo

The 2018 Hackaday Prize

Resumer 3D is on Kickstarter now : https://kck.st/2xQmZYK

Magical box for Resuming 3D Prints automatically.

Rpi B+ and Webcam security system with motion, dvr, and remote access.

Raspberry Pi Security System

Mike [Cazzwell] Cassell

The 2016 Hackaday Prize

tracking CubeSats faster, anywhere and anytime for everybody!

The Distributed Ground Station Network

The 2016 Hackaday Prize

Custom Android app to send commands over to nRF24L01+ receivers with 4-channel PWM capability to control LED strips.

nRF24L01+ network to control lights

The 2016 Hackaday Prize

A simple power socket that contains a relay, a temperature/humidity sensor, a motion sensor and that is manageable over WiFi

Home Automation Power Socket

david-davenne David Davenne

View all

Bits

danjovic wrote 10/11/2021 at 11:43

Thank you for liking my #EXPS/2 project!

Are you sure? yes | no