Close
0%
0%

charly dickens

always curious to new thinks that brought me here the new heatsinks on the trigger chips TDS694C

netherlands
Following
Send a private message
Similar accounts worth following
1 Followers
38 Following
0 Projects
0 Likes
charly-dickens
Send a private message

This user joined on 12/11/2020.

32.2k
5.8k
30
187
An Off-the-grid messaging system.
Project Owner Contributor

Skrypt

taiwoTaiwo

18.8k
1.6k
2
188
This project describes the use of Raspberry Pi as an IoT connected vital signs monitor. The HealthyPi HAT for Raspberry Pi used.
Project Owner Contributor

Connected Health: Open source IoT patient monitor

ashwin-k-whitchurchAshwin K Whitchurch

16.7k
1.7k
26
200
Loko is the 12 gram GPS tracker with extreme battery life.
Project Owner Contributor

Loko-the Tiniest GPS tracker with 270 days battery

akio-satoAkio Sato

14.2k
1k
6
79
Just for the sake of making it happen, I've designed an open-source TOMU form factor ESP32 design. It fits in a USB Type-A port.
Project Owner Contributor

FEMU - An ESP32 Wi-Fi/Bluetooth board in TOMU form

femtoduinofemtoduino

7.1k
5.9k
15
77
Absolute best watch ever !!!!
Project Owner Contributor

BPW34 solar powered led watch

bobriciusbobricius

3.9k
1.3k
5
20
I'm transforming my Planck keyboard into a completely wireless keyboard using Bluefruit LE and wireless chargers.
Project Owner Contributor

Bluetooth Planck Keyboard

alex-kAlex K

3.2k
1.4k
2
12
Portable, 2 channel, balanced input, 24 bit 96khz recording
Project Owner Contributor

Ultimate 4 channel audio recorder

lion-mclionheadlion mclionhead

3k
1.3k
3
18
A very versatile digital audio hub, enabling DIY audio systems using either custom or garden variety modules.
Project Owner Contributor

Flexible Audio Hub

andrew-bolinAndrew Bolin

2.5k
1.5k
0
6
Yet another wireless network of environmental sensors in a home
Project Owner Contributor

Home environment monitor

tundraTundra

2.5k
2.4k
1
17
A 140MHz - 3GHz 2-port T/R VNA and software
Project Owner Contributor

Low cost open hardware VNA

cary-wCary W.

2.4k
948
1
8
A study for a simple pick-and-place head using a servo and an injection needle instead of a hollow-shaft stepper motor and a standard nozzle
Project Owner Contributor

simple pick-and-place head

michael-mayerMichael Mayer

2.4k
2.4k
0
7
Voice Controlled Personal Assistant robot to help you stay lazy using Raspberry Pi and Amazon Alexa
Project Owner Contributor

Dobby - DIY Voice Controlled Personal Assistant

dementorDementor

1.9k
1.9k
2
13
The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.
Project Owner Contributor

Ultra Servo V2.0

patchartrandpatchartrand

1.7k
680
0
9
8-32 channel TI ADS1299 Arduino shield for EEG, EMG, and EKG bio-signals acquisition
Project Owner Contributor

HackEEG

adam-feuerAdam Feuer

1.3k
1.3k
0
10
A really simple CAN network protocol for up to 30 nodes.
Project Owner Contributor

CAN Simple (protocol)

colinconstantcolinconstant

1.2k
1.2k
0
5
Detect beacons and control things without touching anything!
Project Owner Contributor

Bluetooth Beacon proximity gateway

pedro-minatelPedro Minatel

755
624
0
7
A complete closed system within a box for plantation and ecological experiment
Project Owner Contributor

AgriFutureHK Food Computer

benny-cheungBenny Cheung

433
423
0
14
A robotic arm designed to draw/sketch images.
Project Owner Contributor

Leonardo - sketching robot

karthik-ramkarthik ram

View all

Share this profile

Share

Bits

Send a private message to charly dickens

Become cool instantly

Create your Hackaday.io profile like charly dickens and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "charly dickens", please tell us the reason.