0%

0%

Dhruv Chaudhari

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 09/19/2017.

Projects I Like & Follow

The 2017 Hackaday Prize

Using NIR (near infrared) Illumination and real-time image processing, we can make the veins more visible!

Assistance System for Vein Detection

myrijam Myrijam

The 2017 Hackaday Prize

My goal is a 4-bit CPU using recycled cardboard substrate and Diode Transistor Logic. This is an educational platform for me.

The Cardboard Computer - IO is my name

dr-cockroach Dr. Cockroach

Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.

Solar & supercap charged LoRaWAN IoT device

The 2017 Hackaday Prize

AI glasses that provide traffic information and obstacle avoidance for the visually impaired.

Visioneer

MQTT for low power devices

Aquila 2.0 - MQTT-SN based IoT Platform

The 2017 Hackaday Prize

A 16bit single cycle RISC processor suporting R format I format BEQ and JMP format.

16bit RISC Processor

shashi-suman Shashi Suman

I wanted an enclosure for my Prusa i3 to help me print with ABS and ASA filament

Original Prusa i3 MK2 MM Enclosure

tim-wilkinson Tim Wilkinson

Hardware Accelerated Machine Vision platform using the Xilinx Zync 7000 FPGA+ARM System on a Chip and OV04689-H67A 4K CMOS Sensor

ZyncMV

My idea for a room based VR positioning system. The goal is for tennis court coverage to play "real" virtual tennis!

Room Based VR Positioning

lee-cook Lee Cook

Security alarm based on NE555 timer and logic gates, made for hobby purpose

Security alarm

andrea-de-napoli Andrea De Napoli

The 2017 Hackaday Prize

Early warning system which acts as a cataclysm detector that combines an environmental monitor with a mesh network

Nawgnir

The 2017 Hackaday Prize

Use GPG, a Raspberry Pi and a ESP8266 to safely store your passwords - soon with GnuPG Smart Card support

hardpass0.2: hardware passwd manager w/ smart card

This project aims to substitute the low quality hub to control milight / easybulb or limitlessled clones.

canny: ESP8266 + nRF24l01 milight gateway

The 2017 Hackaday Prize

Uses linear CCD and Zynq SoC

Scanning Digital Back for a Large Format Camera

vlad-ivanov Vlad Ivanov

This is my first attempt at making a multi-legged insect inspired robot. I hope to use HOPE as a learning vehicle to a larger bot project.

Hexapod Of Pathetic Engineering (HOPE)

This fun diy project utilizes Arduino Nano and addressable LED strip to create custom cool light show.

Hoverboard Digital LED Lighting

Power banks are useful things. If you have an iPhone, you probably know that the battery lasts about 1 hour.

How To Make Your Own Personalized Power Bank (3D P

Basic lessons about Arduino for beginners with complete explications.

Corso base di Arduino

View all

Bits

Dr. Cockroach wrote 09/20/2017 at 07:36

Good morning Dhruv and thank you for following my #The Cardboard Computer - IO is my name adventure :-)

Are you sure? yes | no