Close
0%
0%

Looky.Chen

automation control

China
Following
Similar accounts worth following
1 Followers
27 Following
0 Projects
0 Likes
lookychen

This user joined on 03/25/2018.

144.8k
1k
53
870
High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®
Project Owner Contributor

Axiom: 100+kW Motor Controller

marcosMarcos

94.1k
843
112
598
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

paul-gouldPaul Gould

90.3k
606
34
432
A modular and open source force feedback interface and motor driver for DIY wheels and controllers
Project Owner Contributor

Open FFBoard

yannick-gigawipfYannick (Gigawipf)

33.6k
606
25
468
An open-source, affordable, dynamic quadruped robot
Project Owner Contributor

mjbots quad

josh-pieperJosh Pieper

29.7k
247
8
168
The Probe-Scope is an open source 60MHz 250Msps oscilloscope probe with all guts built right in, that plugs directly into your PC via USB
Project Owner Contributor

60MHz Bandwidth 250Msps Probe-Scope

mark-omoMark Omo

29.3k
394
26
297
8 GHz BW, up to 1 TS/s ET Sampling I have ceased active development on this project. Please don't ask.
Project Owner Contributor

8 GHz Sampling Oscilloscope

ted-yapoTed Yapo

20.3k
703
44
200
Affordable, precise, integrated motion control for robotics
Project Owner Contributor

Tinymovr Motor Controller

yannisYannis

19.3k
375
30
268
A better-than-servo motor for robotics
Project Owner Contributor

Custom motor for robotics

mishaMisha

16k
688
49
128
Ardunio-Compatible M0/Zero/SAMD21 with FET Driver, MOSFETs, Absolute Magnetic Encoder, USB and RS485 comms. ~$US50
Project Owner Contributor

Brushless Actuator (Arduino-Compatible)

paul-gouldPaul Gould

6.7k
60
10
57
Differential scope probe
Project Owner Contributor

PD150

craig-dCraig D

5.2k
72
5
37
Mechaduino derivative which drives up to 10A at 50V
Project Owner Contributor

HighPower-Mechaduino

thomas-pointhuberThomas Pointhuber

4.9k
42
0
42
A 12A/28V DC brush motor controller with position feedback that speaks CAN-BUS... in one square inch.
Project Owner Contributor

Tiny CAN Positioning Motor Controller

pierce-nicholsPierce Nichols

4.7k
890
0
36
A self sustained 3 to 12S lithium ion battery management system based on the STM32F303 and the LTC6803-2
Project Owner Contributor

DieBieMS - A 3 to 12S Battery management system

danny-bokmaDanny Bokma

3.9k
40
1
34
Inspired by the attempts of other people around the Interwebs, I use a motor as a rotary encoder, but with a different approach.
Project Owner Contributor

Motor as Encoder

besenyeimbesenyeim

3.6k
11
0
12
custom pcb for controlling a bldc motor optimally
Project Owner Contributor

custom bldc motor board using fpga

simon-trendelSimon Trendel

3.2k
24
0
15
DiY, configurable, (relatively) low cost FOC ESC for PMSM and BLDC motors.
Project Owner Contributor

Custom 3-Phase FOC ESC

kai-yinKai Yin

3k
17
7
11
This is project 040108 published in Elektor magazine in October 2004. I just added a few goodies.
Project Owner Contributor

Poor Man's 1GHz Differential Probe

donnie-agemaDonnie Agema

2.3k
37
2
24
This project aims to create an affordable lower limb prosthesis for above knee amputees using hobby grade components.
Project Owner Contributor

Affordable bionic prosthesis

maximiliano-palayMaximiliano Palay

View all

Share this profile

Share

Bits

Send a private message to Looky.Chen

Become cool instantly

Create your Hackaday.io profile like Looky.Chen and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Looky.Chen", please tell us the reason.