0%

0%

Conceptual Hardware

A hardware development company using the latest technologies to help bring new devices and products to the market.

Pittsburgh, PA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 09/22/2021.

My Projects

Custom cyberdeck

BSE_01

conceptual-hardware Conceptual Hardware

KHadas Open Source Media Computer (Khosmic) for local media playback.

Project Khosmic

conceptual-hardware Conceptual Hardware

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2017 Hackaday Prize

An open, superior, low cost alternative to FDM 3D printing that takes advantage of high res LCD technology and modern curable resins.

Low Cost, Open Source, LCD based SLA 3D Printer

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

vojislav-milanovic Vojislav Milanovic

While you could use a WiFi shield, or one of the many, many, ESP8266-equipped 'duinos out there, why not just make your USB cable WIRELESS?

Wireless USB for Instant IoT

thane-hunt Thane Hunt

Creating a break-out board for the ATtiny1616 where sketches can be uploaded from Arduino with the Arduino UNO or a modified AVR JTAG ICE

ATtiny 1-series with Arduino support

sander-van-de-bor Sander van de Bor

Low cost autonomous underwater camera for long term deployments and exploration

PipeCam: Low-Cost Autonomous Underwater Camera

fred-fourie Fred Fourie

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

A dual head PNP machine that uses Openbuilds hardware, a Smoothieboard controller, dual camera vision, automatic/drag feeders, and OpenPnp

Pick and place machine - Smoothieboard/OpenPnp

How to design your own HAT module including ID EEPROM.

Designing a Raspberry Pi HAT

jon-buford Jon Buford

Rpi B+ and Webcam security system with motion, dvr, and remote access.

Raspberry Pi Security System

Mike [Cazzwell] Cassell

The 2017 Hackaday Prize

DIY DLP 3D Printer based on NanoDLP Software using Raspberry Pi 3 and Trinamic Motor Controller

ADAM DLP 3D Printer

The 2018 Hackaday Prize

Flip-Flop design with just one transistor. Nice for transistor-CPU's ! The principle can also be used for vacuum tube flipflops.

One Transistor FlipFlop

3D printed toroidally wound axial flux permanent magnet air core motor. 3DTAFPM?

3D Printed Axial Flux Motor

colby-johnson Colby Johnson

a hardware sampler based on the raspberry pi running bare metal (so no Linux)

openSampler

Infra-red light dimmer (220V/110V) that sits behind a switch in the wall. Powers itself from the mains, uses triac to turn on the bulb.

IR Light Dimmer v2 (1kB Challenge edition)

A savage, retro-cyberpunk inspired Cyberdeck with a focus on human interface. Finished for the Hackaday Cyberdeck challenge 2022.

Voidnet Viator Cyberdeck

leandra-christine Leandra Christine

The smallest DIL40 8085-based computer

SDC_85

The "High Definition Earth Viewing" experiment onboard the ISS runs a few cameras, but not always. Let's find out when video is available!

ISS HDEV image availability

View all

Bits