0%

0%

can.akcay

just trying to learn everyday

Turkey

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/05/2019.

Projects I Like & Follow

A piezo inkjet printer built from scratch

DIY Inkjet Printer

dominik-meffert Dominik Meffert

Fully 3D printed x-ray machine using a dental tube and a custom transformer.

3D Printed X-Ray Machine

francisco-piernas Francisco Piernas

ESP-32 WROOM-32D has Three phase Centre Aligned MC-PWM, Dual SPI, I2C, 2MHz ADC, UART and CAN. Enough for a controller.

ESP-32 BLDC Robot Actuator Controller

paul-gould Paul Gould

A GCODE compatible galvo laser cutter/engraver.

Galvo Laser Cutter/Engraver

dominik-meffert Dominik Meffert

Hackaday Prize 2019

Save 100s of $$$/year, spend 1/4 the time cutting grass and have a weed-free lawn by cutting grass much higher.

34", $100, 20 lb Triple Weed Whacker Lawnmower

nodemcu12ecanada

New cross slide, BLDC spindle motor, custom 32-bit grbl port, spindle sync, threading (G76), MPG controller+++

Mini Lathe (Emco Compact 5) CNC Conversion

terje-io Terje Io

Hackaday Prize 2019

Arduino-compatible board with 128x64 OLED display and 6 buttons for playing simple 2D games.

Tiny game console

mislav-breka Mislav Breka

Use your Wemos motor shield with steppers motors I2C custom slave interface

WEMOS Motor Shield firmware for steppers (I2C)

A simple arc welding circuit with high voltage arc starter and an optically controlled plotter.

Simple Arc Welder & Optically Controlled Plotter

dominik-meffert Dominik Meffert

Reproduce the Digital Computer Lab H-500, a training tool from the late 60's aimed at teaching people the basics of logic circuits.

DEC H-500 Computer Lab Reproduction

michael-gardi Michael Gardi

This article will guide you to construct custom made high voltage variable capacitors with in range of nanofarad.

DIY HV Variable capacitor

Hackaday Prize 2019

Gravimeter array imaging requires building low cost, high sensitivity, time-of-flight (aka high sampling rate) sensors.

Low Cost, Time-of-Flight Gravimeter Arrays

Hackaday Prize 2019

A modular STEM kit (for youth and adults) built around Water Bottle Rockets

Water Bottle Rocket Science Kit

darian-johnson Darian Johnson

Dirty cheap 3D printer base on TFT ，If the cost of resin is not included, the whole machine costs less than $40.

Dirty cheap 3D printer “Tiny Black Hole”

bignest bignest

A self-balancing inverted pendulum with swing-up capability.

Reaction Wheel Pendulum

am-smith A.M. Smith

Hackaday Prize 2019

This is an open-source hardware project for a device that outputs a certain voltage depending on where the rope/wire is bent.

Read Rope / Electronic Nerve

pablo-antonio-camacho-jr Pablo Antonio Camacho Jr.

Cut various metals on your desktop without electrode wear

Wire ECM Machine

dominik-meffert Dominik Meffert

Add an AM/FM radio receiver to your Feather project

AM/FM TunerWing

View all

Bits

Michael Gardi wrote 06/29/2020 at 14:29

Thanks for following my DEC H-500 Computer Lab Reproduction project.

Are you sure? yes | no