0%

0%

badwolfdemon

Roughneck engineer

Missouri

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 12/06/2021.

My Projects

Locked down, wanna replace car radio, do canbus, Android auto backup cam etc, etc Saturn Vue 2006

Jps5

Things I've Built

Roughneck machete of ultimate cleave

Its in the name, sledge hammer handle on a large machete

Projects I Like & Follow

A compact serial terminal with a built-in NanoPi Neo Air running DietPi.

Handheld Linux Terminal [HaLiTerm]

A tool to design highly customizable handouts, quick reference and much more for your Dungeons and Dragons (or other P&P) Sessions

Thermal Printing meets Dungeons & Dragons

daniel-s Daniel S.

This is my attempt at a narrow crossbow/sling shot pistol that is mostly 3D printed.

3D Printed Repeating Crossbow/Sling Shot Pistol

How to make a very simple single tube amplifier that also works at low voltage and is powered by 12V DC.

DIY Simple PCL82 Low Voltage (12V) Tube Amplifier

mircemk mircemk

Equipment power remote control, networked audio interface and a NAS for the digital music collection

Keritech AC-1 Audio Computer

keri-szafir Keri Szafir

Supplyframe DesignLab: 2023 Hackada…

6502 based learning in a familiar form factor

65uino

anders-nielsen Anders Nielsen

Open source KVM switch made for the PiKVM that not only switches the HDMI and USB signals but also the ATX signal.

Pi-Cast KVM Switch

All-in-one computer using the Baffa-2+ Single Board Computer and based on the standard set of boards from the Baffa-2 Project

Baffa-2+ Computer

augusto-baffa Augusto Baffa

Saved from a refuse pile, a Weller WD1 soldering station controller with a broken custom LCD glass. Needed a new display for a new life.

Replacing Broken LCD of Weller WD1

lauri-pirttiaho Lauri Pirttiaho

DIY power supply made from an ATX. Three fixed voltage outputs and a variable one with a Power Meter. All packed in a mini festool systainer

Bench Lab Power Supply from ATX

urs-schmidt Urs Schmidt

Woody is a scratch built quad wheel bicycle with four passenger capacity, with electric power to assist pedaling.

Woody the Electric Four Passenger Bicycle

Portable pen test system running on RP4

Kali Cyberdeck

FPGA-Based PRU for Linux-CNC using free toolchain

LinuxCNC-RIO

oliver-dippel Oliver Dippel

A complete soldering station based on the open source Pinecil soldering iron.

Pinecil portable soldering station

Usually, for HV experiments is used so-called ZVS driver, but damage to the mosfets often occurs due to its low efficiency.

DIY High quality HV source from PC Power Supply

mircemk mircemk

diy arduino tachometer for easy measurement

Arduino Tachometer

In this video I will try to briefly explain how to build a complete device, as well as some of the more important features.

How to make Advanced Laboratory PSU with RD 6006 W

mircemk mircemk

The operational amplifiers are the basic building block of electronics circuit they are smart and has a very low cost and outperforms.

Basics of Operational Amplifiers- Part 1

View all

Bits

Michael Gardi wrote 03/28/2023 at 19:23

Thank you for your interest in my WDC-1 a "Working Digital Computer" project.

Are you sure? yes | no