0%

0%

Debinix

A maker with micro controllers, sensors and HAM as primary interests.

Sweden

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 05/17/2019.

My Projects

Inhaling the solder fumes is terrible for the health. Maybe some old parts from my old PCs could supply some details for this project.

Solder Fume Extraction Station Deluxe - from scrap

Debinix Debinix

The Penguin clock will regularly voice the actual time in your time zone and use its built-in Neopixels for a cozy Christmas feeling.

Build the talking ESP32 clock for the exact time

Debinix Debinix

Projects I Like & Follow

Creating a break-out board for the ATtiny1616 where sketches can be uploaded from Arduino with the Arduino UNO or a modified AVR JTAG ICE

ATtiny 1-series with Arduino support

Sander van de Bor

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

Bourns ACE-128 Absolute Contacting Encoder - 128 positions - with I2C interface - Arduino & Raspberry Pi libraries

High Resolution Absolute Encoder - Arduino & Pi

This PCB footprint allows you to use 3mm x 6mm edge of PCB and a SOIC-8 clip as a cheap and space-efficient connector

SOICbite Programming/Debug Connector Footprint

The device that allows to turn on/off two pairs of the outlet sockets via Web browser through Wi-Fi. Based on ESP8266 and Arduino Mini.

IoT Power Strip

dev-lab dev-lab

The 2017 Hackaday Prize

Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ

Arduino Sudoku game made using 81 seven-segment displays!

Mega Sudoku

A simple board that lets you use the SPI interface on a Raspberry Pi to program ATMEL AVR microcontrollers.

AVR Programmer for Raspberry Pi

A BMS that publishes Cell Voltage to a MQTT Broker

6S IOT BMS

Raspberry-Pi smartphone

Esme Chloe Kealoha Dudoit

The goal of this project is to design a light weight gamma ray scintillator in a 1u CubeSat frame

Gamma Ray Spectroscopy - small, cheap

This article summarizes how to connect your ESP32 WiFi module to the AskSensors IoT cloud

How to connect ESP32 to the IoT cloud

Monitoring the pilot light on my water heater.

The Water Watcher

I made a simple antenna, used cheap TV Tuner and with such hardware controlled via some software I was able to pick satellite signals/images

Recieving the earth's photos from real satellites

This isn't a Hat for a Raspberry Pi. It's a solar powered LoRa repeater on a hat.

LoRa Repeater Hat

Simple Temperature based Fan Controller with programmable settings

Fan Controller

Single Cell Li-Ion/LiPo Battery Fast Charger (3A)

IP2312 Li-Ion Fast Charger

A script to generate project boxes in JSCAD.

JSCAD Project Box Generator

Eric Ljungquist

View all

Bits