0%

0%

Daniel

Student, climber, artist, gardener, curious, mechanic

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/21/2014.

My Projects

A simple breakout board for the FLIR Lepton LWIR Camera module specifically giving access to the SPI and I2C pins.

FLIR Lepton Breakout

Projects I Like & Follow

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

shree-kumar Shree Kumar

The 2016 Hackaday Prize

Network Analyzer on an Arduino Shield which covers from 0-72MHz.

Arduino Network Analyzer

Once I was excited to see Intel's announce that they will release "SD card sized computer" but it was not true. This time I made it true!

SD card sized board, let's say "SDuino"!

The 2017 Hackaday Prize

This project describes the use of Raspberry Pi as an IoT connected vital signs monitor. The HealthyPi HAT for Raspberry Pi used.

Connected Health: Open source IoT patient monitor

ashwin-k-whitchurch Ashwin K Whitchurch

A 1" by 1" 20msps Oscilloscope based on the PIC32MZ

1 Square Inch 20msps Oscilloscope

mark-omo Mark Omo

A portable Yagi antenna for working amateur radio satellites

WA5VJB ultra portable dual VHF/UHF Yagi

The 2016 Hackaday Prize

A tiny wireless capsule camera for medical imaging or space-constrained environments

Tiny Wireless Capsule Camera

ryan-bailey Ryan Bailey

Simple 4-bit CPU consisting of 11 TTLs. Circuit is duplicated from the one in a Japanese book "how to make CPU", "CPUの創りかた"

TTL based 4-bit CPU

30 - 6000 MHz synthesizer with power amplifier

Microwave Transmitter

The 2017 Hackaday Prize

Full featured thermal camera, smaller than a credit card.

Pocket thermal camera

The 2017 Hackaday Prize

Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ

Fully open source scale with ADS1232 24-bit ADC, ESP32 MCU and some coffee related software features.

ESPresso Scale

A small railgun , augmented with neodymium magnets and powered from a single LIR2032 rechargeable coin cell battery.

Coin cell powered railgun

Keeping an eye on the seafloor (especially shellfish)

LoBSTAS: Underwater Camera + Sensor

ellie-t Ellie T

WiFi-enabled controller for AC units which accept an analogue control signal.

WiFi AC controller

maya-posch Maya Posch

Boulder's makerspace, Solid State Depot, is launching a high-altitude balloon in Wyoming during the Aug 21, 2017 eclipse.

Solar Eclipse High Altitude Balloon

dan-julio Dan Julio

The 2017 Hackaday Prize

Using a modified Obsidian theme for VHDL in Notepad++ for integration with Xilinx ISE 14.7

Notepad++ editor for Xilinx ISE 14.7

The 2018 Hackaday Prize

I am trying to build a test bed for trying out localization and mapping algorithms.

QuadRotor testBed for localization and mapping

View all

Bits

Ryan Bailey wrote 11/15/2016 at 18:15

Thanks for the follow! #Tiny Wireless Capsule Camera

Are you sure? yes | no