0%

0%

erik33

Discovered the Arduino platform 7 years ago and since then made some fun and useful projects...

The Netherlands

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/15/2020.

Projects I Like & Follow

Full-on Spotify scrolling and streaming via a Raspberry Pi Zero W and the original iPod clickwheel. Bluetooth, WiFi, and haptic feedback!!

sPot: Spotify in a 4th-gen iPod (2004)

The 2016 Hackaday Prize

An automated version of Petros Vrellis's knit art

Automate the art

An open-source, do-it-yourself thermal imager for everyone!

DIY-Thermocam

Having a finished design comes the prototyping fabrication. This is a step by step tutorial.

From KiCAD Design to Milled PCB in FlatCam

Timo Birnschein

Mini (1.44'' x 0.94'' or 24mm x 37mm) 8X16 RGB LED Array. 128 RGB LEDs with three LED chip each gives 384.

384:LED

This will emulate the AVR code right out of the .ELF file

Arduino ATmega 328 Emulator

Open source 3D printable DLP 3D printer.

Sunrise - DLP 3D Printer, printable.

A project to activate a remote control for a garage via smart phone using an esp8266 module, a pair of relays and some cloud services.

esp8266 internet controlled relay (garage opener)

Ever wondered if your batteries are any good? I built a tester with data logging and tested every battery I could get my hands on.

Battery Analyzer MkII: Alkalines

Moragor Moragor

The 2016 Hackaday Prize

A small and flexible system for building a home automation system.

Small Home Automation System

A simple breakout board for the FLIR Lepton LWIR Camera module specifically giving access to the SPI and I2C pins.

FLIR Lepton Breakout

Create a 1971 VertiBird toy with a modern TWIST!

VertiBird Redo

A TTL/CMOS based clock that displays the time along a 60 LED bargraph.

TTL/CMOS Linear LED Clock

RGB magic with a twist, simple and looks amazing.

Magic Mirror LED Clock

The 2018 Hackaday Prize

Following a supercharger mod on my 1990 Corrado, I realized that I needed a unique tube design to ensure proper fit and no preassure leaks

3D Printed Boost Tube Replacement

Hackaday Prize 2019

An Arduino-based USB keyboard simulator which injects keystrokes via Bluetooth protocol or predefined payloads in SD card

Arduino USB Keystroke Injector (Arduino BadUSB)

Amirreza Nasiri

The 2018 Hackaday Prize

The Novel Integration of Additive Manufacturing and Autonomous Craft (N.I.A.C.A.M)

N.I.A.C.A.M: An Autonomous 3D printing Drone

A clock made from an old hard drive.

HDD Clock

View all

Bits